Allicdata Part #: | AT-2305(40)-ND |
Manufacturer Part#: |
AT-2305(40) |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | ATTENUATOR 5DB |
More Detail: | RF Attenuator 5dB ±0.5dB 0Hz ~ 2.5GHz 50 Ohms 1W S... |
DataSheet: | AT-2305(40) Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 5dB |
Frequency Range: | 0Hz ~ 2.5GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators have long been used in various fields where reducing the power of an electrical signal without significantly distorting its form is required. The AT-2305(40) attenuator is a type of variable resistor specifically designed for such purposes.
The AT-2305(40) attenuator is a four-terminal resistor with two fixed and two movable contacts. It has a maximum resistance of 40 ohms, and can reduce the signal power to a fraction of the output. The two fixed contacts are connected to the input and output of the circuit, while the two movable contacts are connected to a control circuit. This allows the resistance of the resistor to be adjusted according to the requirements of the circuit.
The AT-2305(40) attenuator is most commonly used in the telecommunications and audio industries, where a reduction of noise and distortion of the signal is desired. It is used to reduce the signal power in order to reduce the amount of noise produced by the circuit. By reducing the signal power, the circuit can also be designed to require less power, further decreasing the chances of thermal runaway. The usage of the AT-2305(40) attenuator in these industries has enabled the production of cleaner and higher fidelity audio signals, while also making circuits more energy efficient.
The AT-2305(40) attenuator can also be used in a variety of other applications. It can be used to reduce the power of an amplifier, and to reduce the power in other types of circuits. It can also be used for controlling the power of certain types of motors, such as servo motors. Finally, it can also be used as a voltage regulator for controlling the voltage of various circuit components.
The working principle of the AT-2305(40) attenuator is fairly simple. The resistor is connected to two terminals on either side. When a voltage is applied between these terminals, a current is created which passes through the resistor. As the current passes through the resistor, it causes a reduction in the voltage, resulting in the attenuation of the signal. The amount of attenuation is determined by the resistance of the resistor, as higher resistance leads to higher signal attenuation.
In summary, the AT-2305(40) attenuator is a versatile four-terminal resistor designed to reduce the power of an electrical signal without greatly distorting its form. It is most commonly used in the telecommunications and audio industries, but can also be used in a variety of other applications for controlling the power of various components. The working principle of the attenuator is based on the idea of reducing the voltage by passing a current across a resistor, which results in the desired degree of signal attenuation.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...