Allicdata Part #: | AT-2606-ND |
Manufacturer Part#: |
AT-2606 |
Price: | $ 209.98 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | ATTENUATOR N TYPE |
More Detail: | RF Attenuator 6dB 0Hz ~ 3GHz 16W SMA In-Line Mod... |
DataSheet: | AT-2606 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 190.89000 |
Specifications
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 6dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 16W |
Package / Case: | SMA In-Line Module |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
An attenuator is a device typically used to reduce the amplitude of an analog signal. An AT-2606 attenuator is a solid-state, programmable, 6-bit amplifier that is designed to provide continuous, adjustable signal attenuation. In this article, we will discuss the application field and working principle of the AT-2606 attenuator.Application Field
The AT-2606 attenuator is commonly used in a wide variety of applications such as data acquisition, biomedical instrumentation, antenna systems, and test and measurement. In addition, it is suitable for use in operations that require precise amplitude adjustment of both low-level and high-level signals. Its wide range of input signals and adjustable attenuation allows it to be applied in a variety of applications ranging from audio and video to RF and microwave.Working Principle
The AT-2606 attenuator is based on a binary weighted resistor network and operates using a five-volt power supply. The signal to be attenuated is applied to the inputs of the network and the output is taken from the outputs. The gain is controlled by adjusting the resistors at each bit position. Each bit is either at 0 or 1, with 0 representing the lower gain and 1 representing the higher gain. The resolution of the attenuator is defined by the number of bits in the network. The AT-2606 attenuator uses a 6-bit converter, which gives it 64 (26) different steps of attenuation.The AT-2606 attenuator also incorporates a sample-and-hold circuit, which ensures wideband accuracy and low noise operation. The sample-and-hold circuit samples the input signal at the beginning of each attenuation cycle and holds it until the attenuation cycle has been completed. This ensures that the output signal is exactly the same as the input, even if the signal is varying continuously.The AT-2606 attenuator also provides a wide dynamic range, up to 65 dB of attenuation. The attenuator is also temperature stable, with its temperature coefficient of ≤ 0.1 dB per °C. This makes it ideal for applications that require accurate and consistent signal attenuation over a wide range of temperatures.The AT-2606 attenuator is designed to withstand high voltage levels without losing performance or accuracy. The attenuator can handle up to 1kV of power and can operate up to 400MHz.Conclusion
The AT-2606 attenuator is a versatile and accurate device that can be used in a variety of applications. It features a solid-state design, wideband accuracy, 65 dB of dynamic range, and temperature resistance of up to 400MHz. With its wide range of features and application field, the AT-2606 attenuator is an ideal choice for operations requiring precise signal attenuation.The specific data is subject to PDF, and the above content is for reference
Latest Products
HMC939LP4E
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
ATT-0225-60-TNC-02
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
M3933/17-09N
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
E-TA3216 T 2DB N6
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
AT-206(40)
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
ATT-0276-07-SMA-02
RF ATTENUATOR 7DB SMA MODULERF Attenuato...