AT24C16A-10PU-1.8

Write Cycle Time - Word, Page:	5ms
Base Part Number:	AT24C16
Supplier Device Package:	8-DIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C (TA)
Voltage - Supply:	1.8 V ~ 5.5 V
Memory Interface:	I²C
Access Time:	4.5µs
Series:	--
Clock Frequency:	400kHz
Memory Size:	16Kb (2K x 8)
Technology:	EEPROM
Memory Format:	EEPROM
Memory Type:	Non-Volatile
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AT24C16A-10PU-1.8 is a type of Memory device typically used in embedded applications. Memory is an important component of computers and other electronic devices that allows data to be stored and accessed quickly and reliably. Memory devices can be found in a wide variety of types and sizes from small micro SD cards to large external hard drives. Memory devices such as AT24C16A-10PU-1.8 are particularly useful for embedded applications as they are usually small, low power, and reliable.[\s\S]*AT24C16A-10PU-1.8 is a two-wire serial EEPROM memory device. The device is available in 8-pin SOIC and 7 pin TSSOP packages and with a wide operating temperature range. The device uses an 8-bit address and can store up to 16,384 8-bit data words. The device communicates with a host processor using an I2C-compatible serial interface. The device is capable of up to 1.8MHz operation for faster data transfer rates, and can be clock stretched for slower data transfer rates. The device runs in a low power mode, consuming only 500nA of current for reads and 1µA for writes. The device is compatible with both 2.5V and 3.3V logic, and can also be used in 5V logic systems with the appropriate level-shifters.The AT24C16A-10PU-1.8 has several applications, including storing small amounts of data, such as calibration values and system settings, and interfacing to micro controllers with limited EEPROM or flash memory. The device is also suitable for small portable applications, such as personal data assistants (PDAs) and GPS units, where size, weight, and power are of particular importance.In addition to its small size and low power consumption, the AT24C16A-10PU-1.8 also features excellent ESD protection and a write cycle endurance rating of over 10,000,000 cycles. The device is protected against accidental writes and has internal data protection for longer data retention.The AT24C16A-10PU-1.8 has several working principles. Data is written or read from the device using the I2C protocol. Each data transaction requires the sending of a start condition followed by the device address, a read/write bit, one or more data bytes, a stop condition, and an acknowledge from the device to indicate completion of the transaction. Data is written in 8-bit pages and can be up to 128 bytes long. The device also has internal circuitry to stretch the SCL signal during writes, so the write cycle time can be adjusted to longer than one millisecond if needed.In summary, the AT24C16A-10PU-1.8 is an excellent choice for embedded applications where low power and small size are important. The device is reliable and has a wide operating temperature range, making it well-suited for portable and mobile applications. The device\'s two-wire serial interface and page write operations make it simple to control and easy to interface with other devices. Together, these features make the AT24C16A-10PU-1.8 an ideal choice for device memory requirements.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description