Allicdata Part #: | ATT-0218-13-NNN-02-ND |
Manufacturer Part#: |
ATT-0218-13-NNN-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 13 DB DC 12.4GHZ |
More Detail: | RF Attenuator 13dB ±0.5dB 0Hz ~ 12.4GHz 50 Ohms 2W... |
DataSheet: | ATT-0218-13-NNN-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 13dB |
Frequency Range: | 0Hz ~ 12.4GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | N-Type In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
ATT-0218-13-NNN-02 is an attenuator, a device used to reduce the amplitude or magnitude of a signal. It is commonly used to lower the output power from a transmitter, to reduce the signal strength from an amplifier, or to match equipment to different impedance levels. Attenuators are typically used in transceiver systems such as two-way radios, and for tuning the input and output impedance in RF (radio frequency) circuits.
An Attenuator is a three terminal network composed of discrete elements which can be chosen to provide varying amounts of attenuation. This type of attenuator is composed of resistive elements, which can be arranged in various configurations (series, parallel, and combinations of each) to achieve the desired amount of attenuation. Generally, the attenuator design is classified according to the number of fixed resistance elements that comprise the attenuator.
The ATT-0218-13-NNN-02is a fixed attenuator designed for severe environmental conditions and is capable of handling high power and voltage levels. It has a compact size that allows it to be used in confined spaces. The attenuator can be used in a variety of applications, including telecommunications, general RF applications, broadcast applications, and industrial. Its applications include: matching the output of a transmitter to the input of a receiver, reducing the risk of RF interference from an antenna system, and reducing the power output of an amplifier to a safe level for operation.
Attenuators work by allowing a portion of the input signal to remain, while the rest is diverted to ground or some other load. A portion of the signal energy is thus diverted, resulting in reduced power level over the system. In the case of ATT-0218-13-NNN-02, the attenuator can be used to reduce the transceiver signals by up to -30 dB. The remaining attenuation is determined by the selection of the correct combination of resistive elements.
The ATT-0218-13-NNN-02 is constructed with a printed circuit board (PCB) and is enclosed in a rugged aluminum housing, giving it ruggedness and making it suitable for installation in a variety of applications where there is a need to limit signal strength in a controlled manner. The attenuator is capable of handling high power and withstands high voltage up to 1000 V. It also features a low VSWR (Voltage Standing Wave Ratio) of 1.5:1 at maximum attenuation. The RF connectors used for this type of attenuator are typically SMA or N-type, which ensures a secure connection and reliable performance.
The ATT-0218-13-NNN-02 offers superior performance and reliability. Its small size and low insertion loss make it ideal for applications requiring precise signal control. Additionally, the attenuator housing and terminals are designed for strong protection, making it suitable for use in harsh environment where other attenuators would not survive. The ATT-0218-13-NNN-02 is also a great choice for those looking for a cost-effective solution for reducing the power of high power transmitters.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...