ATT-0277-16-SMA-02

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electronic devices used to reduce the power level of a signal. The ATT-0277-16-SMA-02 is a 20dB fixed attenuator with an SMA female connector at each end and a 50 ohm impedance. The device provides a fixed 20dB degree of signal attenuation which is ideal for applications requiring a calibrated and known level of signal attenuation. The unit features a very flat response with an insertion loss of approximately 1.5dB.

The ATT-0277-16-SMA-02 is commonly used in electronics and radio communications for applications such as cellular base stations, research laboratories, laboratories, and test instruments. The device has a maximum capability of handling 5 watts of power and operating frequencies of up to 4GHz. With its versatile design and construction, many applications are possible with the ATT-0277-16-SMA-02.

The working principle of the ATT-0277-16-SMA-02 involves a simple, passive engineering principle known as resistive-voltage divider. The attenuator is made up of two resistors connected in parallel, the first (R) has a constant resistance (resistance is determined by type and size, generally 50 ohms), while the second (R’) is adjustable and can vary between a high and low resistance level (this is determined by the attenuator model).

As current travels through the body of the attenuator, the first resistor will always maintain a constant resistance and the second will be adjusted to match a desired impedance level as set by the user. This adjustment will then result in a constant divider of the voltage, with a constant impedance matching resistance being maintained by the second resistor. Any excess power not needed will travel through the second resistor and be dissipated as heat.

The ATT-0277-16-SMA-02 works by combining a particular resistance (R) with an adjustable resistor (R’) such that the output resistance, Impedance Matching (ZM), is created. As current flows from the input side of the attenuator to the output, only a fixed fraction of this current will flow through R, while the remainder will flow through R’. This results in a reduction of the overall signal power from the input side to the output side, thereby attenuating the signal.

The main benefit of using the ATT-0277-16-SMA-02 is that it allows the user to precisely adjust the amount of signal power entering the system. It is also useful for testing and calibrating systems where a precise current supply and load resistance are desired, as a precision-attenuated signal will help match the load conditions. Furthermore, the ATT-0277-16-SMA-02 requires minimal user adjustment and no maintenance, making it a reliable and efficient attenuator.

The specific data is subject to PDF, and the above content is for reference