B88069X0680T502

Series:	--
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Voltage - DC Spark Over (Nom):	255V
Impulse Discharge Current (8/20µs):	--
Tolerance:	--
Fail Short:	No
Mounting Type:	Through Hole
Package / Case:	Axial Cylinder

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of Gas Discharge Tube Arresters (GDT) Gas Discharge Tube Arresters (GDT) refer to semiconductor components that utilize a hollow pillar or tube filled with metal oxide particles, which act like a one-way switch and pass or short out high frequency signals. The principle of operation is that when an external voltage is applied, the metal oxide particle inside the tube will be charged, and discharge the external voltage.B88069X0680T502 ApplicationThe B80069X0680T502 is a type of GDT designed to protect a variety of electronic devices from voltage transients. It has a nominal breakdown voltage of 8.5 KV, and is suitable for use in a variety of applications, including computers, telecommunications equipment, and medical equipment.The B80069X0680T502 is designed to protect these devices from transient events such as lightning strikes and power outages, and can also be used to prevent malfunctions that could be caused by voltage spikes and other forms of electrical noise.The B80069X0680T502 can also be used to protect sensitive devices from noise caused by power supplies, switch mode power supplies, and other sources of electrical interference.Working Principle of B88069X0680T502The B80069X0680T502 is a GDT designed to protect devices from a number of different transient events. It is composed of two parts—a pillar or tube that is filled with metal oxide particles, and an external AP/JP connector.When a surge or spike of voltage enters the external AP/JP connector, the metal oxide particles inside the tube become charged, and begins to allow the flow of current. The metal oxide particles then start to conduct, creating a channel for the surge to flow through, thus protecting the device from the transient.When the transient voltage subsides, the metal oxide particles become charged again, and the current stops flowing. This process repeats itself, allowing the device to be protected from any other transient voltage events.ConclusionThe B80069X0680T502 is a Gas Discharge Tube Arresters (GDT) that is designed to protect a variety of electronic devices from voltage transients. It has a nominal breakdown voltage of 8.5 KV, and is suitable for use in a variety of applications, including computers, telecommunications equipment, and medical equipment. The working principle of B80069X0680T502 is based on the metal oxide particles which become charged, and allow the flow of current when a surge or spike of voltage enters the external AP/JP connector. When the transient voltage subsides, the metal oxide particles become charged again, and the current stops flowing. This process repeats itself, allowing the device to be protected from any other transient voltage events.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description