BCR16FM-14LB#BG0

Series:	--
Part Status:	Active
Triac Type:	Standard
Voltage - Off State:	800V
Current - On State (It (RMS)) (Max):	16A
Voltage - Gate Trigger (Vgt) (Max):	1.5V
Current - Non Rep. Surge 50, 60Hz (Itsm):	160A @ 50Hz
Current - Gate Trigger (Igt) (Max):	30mA
Configuration:	Single
Operating Temperature:	-40°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3 Full Pack
Supplier Device Package:	TO-220FPA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

BCR16FM-14LB#BG0 Application Field and Working Principle

A TRIAC, short for \'Triode for Alternating Current\', is a solid-state component that can control the amount of current passing through it. BCR16FM-14LB#BG0 is a kind of commercial TRIAC that is widely used in various applications with its pinch-off voltage and on-state resistance.The applications of BCR16FM-14LB#BG0 mainly include power switching, motor control, light dimming, and general AC control. It is widely used for electricity charging and solar power system, electric welding and air conditioning control etc. Being one of the commercial TRIACs, BCR16FM-14LB#BG0 has excellent properties of blocking and on-state voltage& current, demonstrating superior performance in a broad range of load conditions.The working principle of BCR16FM-14LB#BG0 is quite simple. It is a three-terminal bistable device, meaning that it has two stable states. In condition one, the device allows current to flow through, while in condition two, it blocks the passage of current.The first step to trigger BCR16FM-14LB#BG0 is to provide a small amount of gate current. This will cause the conduction of the current through the device even in the absence of voltage. After the gate current is reduced, the TRIAC will remain in "on" condition until a sinusoidal voltage is applied to it. When sinusoidal voltage is supplied to BCR16FM-14LB#BG0 TRIAC, it will allow the current to flow through the device. At this stage, the TRIAC will be in a breakdown state and it will start to conduct current. The conducting current is determined by the current sourced from the sinusoidal voltage and the gate current applied earlier.Once the current is supplied, the electrical current has to pass through the device to be turned off. The process of turning off the device is known as "commutation" or "holding off". When the commutation is completed, the device is ready to be operated again. A key feature of BCR16FM-14LB#BG0 is that it can be triggered to a stable state easy by providing a very small amount of gate current. This property has made BCR16FM-14LB#BG0 a primary choice for many applications such as AC power control, solar power, and light dimming etc.It can easily be seen that BCR16FM-14LB#BG0 is an excellent commercial TRIAC with wide application. Its simplicity of operation, high performance and low cost make it an ideal choice for many electrical applications. It is definitely a fantastic device with a great potential for solving many applications which require a stable and powerful solution.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description