BD11670GWL-E2 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BD11670GWL-E2 is an Analog Switch that falls into the Special Purpose Interface category. It is a single-pole, double-throw (SPDT) low frequency analog switch, designed to switch signals in the range of 0.5 MHz to 5 MHz. It is suitable for both digital and analog applications.

The BD11670GWL-E2 has an integrated high-speed, low-power CMOS design. It is one of the most widely used analog switches in the market due to its high performance, wide bandwidth and low power consumption. It has an on resistance of 0.5 ohms, low leakage current of 1 nA and a wide common-mode range of -3V to +3V. It also has a high input impedance, a wide input voltage range up to 5.5V, and low crosstalk and noise performance.

In addition, the BD11670GWL-E2 features low channel-to-channel matching, fast switching speeds (tOFF = 25 ns typ, tON = 15 ns typ) and low power dissipation. It also has ESD protection, a shutdown discontinuous mode, and is available in 16 pin, 4x4mm DFN packages. It is rated for 1.8V-3.6V between VCC and GND. Lastly, it is highly temperature stable, operating over a temperature range of -40 to +85 °C.

The BD11670GWL-E2 is most often used in high speed analog and mixed signal applications, such as sample-and-hold circuits, multiplexers, switching power supplies and line-level switching. It is also used in switching microphone and speaker signals. The device helps to reduce overall power consumption in electronic devices, while simultaneously reducing cost and space requirements.

The working principle of the BD11670GWL-E2 is simple. It takes two separate inputs, an A-input and a B-input, and switches between them based on the logic state of the control signal. When the control is held low, the A-input is connected to the output and the B-input is disconnected. When the control is held high, the B-input is connected to the output and the A-input is disconnected. It’s that simple.

In summary, the BD11670GWL-E2 is a low frequency analog switch from the Special Purpose Interface category. It is used in numerous high speed applications due to its high performance, wide voltage and common-mode ranges, low power consumption, and low crosstalk and noise performance. The device is rated for 1.8V-3.6V between VCC and GND, and operates over a temperature range of -40 to +85 °C. Lastly, its simple working principle allows it to switch between two separate inputs depending on the logic state of the control signal.

The specific data is subject to PDF, and the above content is for reference