BT168GWF,115 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs, also known as silicon controlled rectifiers, are a three-terminal semiconductor power switch. SCRs are widely used in industrial applications to control currents up to several thousand amperes. BT168GWF,115 is a popular model of SCR, with features such as a rated break-to-break forward current of 168 amperes and a peak reverse voltage of 115 volts.

SCRs rely on a mechanism called “asymmetric conduction” to control the flow of current. This means that the current will start to flow when the gate’s voltage reaches a certain threshold. The current will continue to flow until the voltage drops below the threshold. This makes SCRs useful for controlling currents in applications requiring quick response times.

The BT168GWF,115 is a popular SCR due to its relatively low cost, high current rating, and the ability to work with a wide range of voltages. The BT168GWF,115 is also used in a wide range of applications. Some of the most common applications for the BT168GWF,115 are industrial processes such as motor control, power synchronisation, power factor correction, and load control.

The BT168GWF,115 has a few features that make it ideal for motor control. Firstly, it has a relatively high peak forward current rating of 224 Amps, allowing it to support most motor controllers. Secondly, it has two terminals (anode and gate) with a short distance between them, allowing it to fit easily in tight places. Lastly, it has a turning-on and off delay of less than 25 µs, meaning it is suitable for variable speed applications.

In power synchronization applications, the BT168GWF,115 is often used to ensure that several connected systems keep operating in sync. This helps to improve the overall system efficiency and maintain smooth operation in the long run. The BT168GWF,115 is also used in power factor correction systems, to ensure that the current and voltage from the mains are in phase. The BT168GWF,115 is also used for load control, to switch on and off appliances in response to changes in the mains voltage.

The BT168GWF,115 can also be used as an isolation switch, providing an effective barrier between the output of the rectifier and the load. This helps to reduce interference between different circuits and protect the components from harmful voltages. It can also be used as a safety device, cutting the power supply in case of dangerous overvoltage or overload conditions.

The BT168GWF,115 is a versatile SCR with low cost, high current rating, and wide compatibility with different applications. Its features, such as its short distance between the anode and gate terminals, make it ideal for motor control, power synchronization, power factor correction, and load control applications. Additionally, its low turn-on and off delay allows it to be used in systems requiring quick response times.

The specific data is subject to PDF, and the above content is for reference