BTA16-600BRG

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Standard
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	16A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	160A, 168A
Current - Gate Trigger (Igt) (Max):	50mA
Current - Hold (Ih) (Max):	50mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220AB
Base Part Number:	BTA16

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

BTA16-600BRG is a type of semiconductor component made up of a three-terminal device that combines several isolated thyristors in a single package. The BTA16-600BRG is a type of thyristors, also known as TRIACs, that are typically used to control power switching in circuits. The BTA16-600BRG is a component made of silicon and is designed to provide fast switching, high voltage, and a low-power consumption. This component has multiple uses in electrical circuits, including controlling phase in motor applications, controlling temperature in heating applications, providing fast switching in switching power supplies, and in static relay applications.

Types of Thyristors

Thyristors are typically of three types: thyristors consisting of a single P-N junction, such as diodes; thyristors consisting of two junction pairs, such as the BTA16-600BRG; and thyristors with three or more junction pairs, such as SCR (Silicon Controlled Rectifier). Thyristors are generally classified into two types, unidirectional and bidirectional. Unidirectional thyristors, also known as silicon-controlled rectifiers, are used to switch an electric current in one direction. Bidirectional thyristors, more commonly known as TRIACs, are used to switch an electric current in both directions.

BTA16-600BRG Characteristics

The BTA16-600BRG is a three-pin, bidirectional thyristor composed of two independent thyristors in a single package. The two thyristors in the BTA16-600BRG are connected in a back-to-back configuration, and each have a gate terminal which enables the majority carriers to pass through the junction. The BTA16-600BRG can be triggered into conduction by gate current. It has an off-state voltage of 600 volts and a peak on-state current rating of 16 amperes.

BTA16-600BRG Applications

The BTA16-600BRG can be used in various electrical circuit applications, such as phase control in motor applications, static switching, heating control applications, static relays, and in static power supplies. It is especially useful in motor phase control applications, as the BTA16-600BRG provides a reliable and efficient means to switch electric current in both directions. The BTA16-600BRG can be used in motor phase control circuits to control the speed of the motor. The BTA16-600BRG is also suitable for static switching applications, such as controlling the power output of switching power supplies. In heating control applications, the BTA16-600BRG can be used as a low-cost alternative to a temperature controller. In addition, the BTA16-600BRG is also suitable for static relays and static power supplies.

BTA16-600BRG Working Principle

The BTA16-600BRG operates on the principle of a constant switching current. When the gate terminal of the BTA16-600BRG is stimulated by a gate current, the majority carriers pass through the junction of the thyristor. These majority carriers are repelled by the current source, and as a result, the voltage at the junction of the thyristor is increased. This increase in voltage causes the thyristor to switch on and allows a current to pass through. When the gate current is no longer present, the thyristor will switch off, and the current through it will be interrupted.

Conclusion

The BTA16-600BRG is a three-terminal semiconductor component that is widely used in motor and switching applications. The BTA16-600BRG is a type of TRIACs, and is composed of two independent thyristors in a single package. The BTA16-600BRG can be used for controlling phase in motor applications, controlling temperature in heating applications, providing fast switching in switching power supplies, and employing static relay applications. The BTA16-600BRG switches on and off by applying a gate current, and operates on the principle of constant switching current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description