C464-RAG15H-CGO

Panel Indicators, Pilot Lights

C464-RAG15H-CGO supports a variety of panel indication and pilot light applications. It has two unique features that enable this device to be used for a wide range of indications and light applications. What makes this device stand out is the dual function operation, as well as the ability to interface with digital logic signals.

The C464-RAG15H-CGO has four leads which allow for a maximum output power of 30 watts. This device is a bi-lateral switching circuit, allowing for two distinct and dedicated switching operations. The voltage range of this device is 6V to 24V DC, and the maximum current is 2 amps. This device can be used for indicating a variety of conditions as the output can be adjusted from either negative ground or positive ground which can be utilized to activate a relay or indicate a pre-set condition. The device operates at frequencies of 400 Hz to 1000 Hz.

The application areas where the C464-RAG15H-CGO is most useful would be related to its use in digital interfaces, providing customized and controllable indicators. This would enable a single device to control multiple indicators and light sources, displaying both high and low level logic signals. In this type of application, an interface circuit or terminal board circuit can be used to connect the C464-RAG15H-CGO device to the required source for logic signal input.

The C464-RAG15H-CGO uses a unique pilot light or indicator technology, known as LED (Light Emitting Diode). LED\'s are an efficient means of providing illumination in panel indicating applications as they are an energy efficient source of light, providing a bright and long lasting source which will last in excess of 10,000 hours. The particular advantage of this device is that it will only consume power when the indicators are actively switched on or off, and not whilst they remain in the off state.

In addition to the use of LED, the device can also provide audio signals as well as visual indications. The audio portion of the device will match the current lighting cycle to provide warning indication and can reach a maximum of 95 decibels that is audible at approximately 8 meters from the source. The audio portion of the device is powered off the same circuit as the LED lighting portion.

The C464-RAG15H-CGO is an exceptional device which can provide multiple types of primary or secondary indications, creating an independent and reliable means for providing alarm or audio warning indications. This device is ideally suited for panel indication, pilot light and other similar applications. The combination of LED and audio technology provides a uniquely customisable application, allowing for a variety of different information and notification methods.