Allicdata Part #: | BEL11929-ND |
Manufacturer Part#: |
C7372 |
Price: | $ 271.31 |
Product Category: | Uncategorized |
Manufacturer: | Belden Inc. |
Short Description: | 710 C/P AERIAL MOUNTING CLAMP |
More Detail: | N/A |
DataSheet: | C7372 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 246.64500 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
C7372 is a universal passive component intended for radio frequency applications. It can be used in a variety of applications, such as low noise amplifiers (LNAs), filters, power dividers, and antenna designs. It is also an ideal component for the development of various communication systems and mobile devices.
The C7372 is based on a single dielectricant filled resonator technique, using a foam dielectric as the resonator. It consists of two layers of foam, one at the top and one at the bottom, separated by an air gap. The top layer has a conductor pattern on it, which forms the resonant circuit. The resonator is designed to resonate when excited by an oscillating electrical signal. The signal then passes through the foam layer and exits the component as an oscillating electrical wave.
The foam dielectric material used in the C7372 is a special type of foam which is designed to minimize losses and maximize the energy transfer efficiency. This type of foam has a high compressive strength and is very stable in a wide range of temperatures and environmental conditions. The foam is also designed to have low electrical loss, which is necessary for efficient high-frequency signal transfer.
The C7372 has a wide frequency range and its properties are highly dependent on the type of material used. For example, a low frequency of operation requires a higher compression strength and a higher Q-factor than a high frequency would. The highest achievable Q-factor is in the mid-band. The C7372 also has an inherent stability that helps minimize the effects of environmental factors, such as temperature and humidity.
The main advantage of the C7372 is its ability to provide excellent performance in very small sizes. This performance is due to the foam\'s high temperature stability, low electrical loss, and excellent compressive strength. It is also very cost effective compared to other types of RF components.
The C7372 is ideal for use in antenna designs, filters, power dividers, and low noise amplifiers. It is also useful for various communication systems and mobile devices because it can reduce the size and cost of the circuit. In addition, its low electrical loss and wide frequency range make it an ideal choice for many RF applications. While the C7372 provides good performance in small sizes, its disadvantages include its relatively high compressive strength, which reduces its adaptability and can result in instability.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE