CAT1162WI-25-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CAT1162WI-25-T3 is a family of low-cost, wide-range, fixed delay supervisory circuits for the reset of multiple voltage supplies and processor systems. A PMIC (Power Management Integrated Circuit) supervisor is a type of circuitry that holds a processor provide reset signals of stable voltage and frequency.

The CAT1162WI-25-T3 is a unique device that is capable of taking in an assortment of DC output voltages and reacting in various ways. The CAT1162WI-25-T3 is able to differentiate between a low and high volt authority level over the range of input voltages and provides a reset signal immediately when the voltage is out of range.

This supervisor is designed to monitor process voltages and multiple associated power supply voltages. It will provide reset signals to the processor as soon as any of the voltages are out of range. This helps ensure that the processor can safely access its data and execute its programming functions.

In order to work properly, the CAT1162WI-25-T3 must be granted access to certain input voltages. It needs to be provided with an input voltage below which it will provide a reset signal, and an input voltage above which it will provide a reset signal.

This device will also monitor the voltag e on its reference pin. This reference pin must be set to a voltage level that the supervisor will recognize as it low or high point. The device will react to any voltage mentioned above this reference pin according to the settings.

The CAT1162WI-25-T3 will also check for voltage drops caused by board level noise. This device is programmed to an open drain which is activated when the voltage drops within a certain range. This drain will empty any conduits that are not needed. This allows the supervisor to remain active at all times.

The CAT1162WI-25-T3 is also equipped with an adjustable delay time. This allows the supervisor to provide reset signals at an appropriate time frame. For example, if the supervisor is monitoring an input voltage that fluctuates faster than the delay time, the supervisor will provide a reset signal for each voltage spike according to the programmed delay time.

The CAT1162WI-25-T3 is typically used in applications that require overvoltage protection, or input signals that require regulation under different conditions. It can also be used in systems with multiple processors that must be reset in order to maintain stability. It is also used to monitor high powered motors and engines operating at various RPM’s.

This supervisor is a low cost, reliable, and effective device that can monitor multiple voltages and different signals. It can provide reset signals when voltages are outside the programmed range, and can be adjusted to provide reset signals in response to fast moving voltage fluctuations. This supervisor is an ideal solution for applications that require precise voltage regulation.

The specific data is subject to PDF, and the above content is for reference