CC100LA600-60HZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Contactors (Electromechanical)

The CC100LA600-60HZ contactor is a commonly used electromechanical switch designed to control electric motors. It is typically used in control circuits up to 600V AC with motor operating currents up to 60A. It is preferred in applications where switching over longer distances is required, such as controlling motors located in a different section of an industrial facility from the controller. The CC100LA600-60HZ contactor is typically constructed from two main components: the operating mechanism, and the contacts.

The operating mechanism of a CC100LA600-60HZ contactor is relatively simple. It has a motorized armature connected to a series of coils. When electricity is applied to the coils, they create a small magnetic field, causing the armature to move and press against the contacts in the contactor. This movement causes the contacts to close, forming an electrical connection that allows a current to pass through to the load. When power is removed from the coils, the armature and contacts return to their original positions, thus cutting off the current.

The contacts of the CC100LA600-60HZ contactor are also constructed from a fairly simple design. The contact is typically constructed from pure copper with the contact points formed into a set of blades that can move freely against each other. The contact blades are covered with a thin layer of silver or nickel-plated material in order to ensure a low contact resistance and avoid arcs and sparks when the contacts close.

The CC100LA600-60HZ contactor is designed to handle a variety of different applications. It is commonly used to control electric motors, though it can also be used to switch lighting and heating systems. In applications where the contactor must handle frequent switching cycles, it is important to ensure that the contact points are kept clean and free of dirt or dust. This will help to ensure that the contacts maintain a good connection and prevent damage to the contactor.

The CC100LA600-60HZ contactors are designed to be used in industrial or electrical environments, they are primarily intended for use in the U.S. and Canadian markets. These contactors are rated for up to 600V AC and can handle a current of up to 60A, depending on the application. They are relatively easy to install and require minimal maintenance, making them a popular choice for many different industrial applications.

The specific data is subject to PDF, and the above content is for reference