CD74ACT253M96

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CD74ACT253M96 is a quad-channel decoder and multiplexer designed for high-speed data communication applications. It is a logic-based switch, allowing for an increase in data rate without increasing the bandwidth of the product. This product can be used to route signals from one switch to another, multiplex data streams, and to decode strings of logic signals into specific paths. This unique architecture means that it can be used to interface communication systems with different buses, as well as to provide a route for transmission or storage of data.

The CD74ACT253M96 is a 3-bit binary decoder that takes a three-bit data stream as the input and produces four outputs. The four outputs are active-low and the output load is TTL compatible. It has a maximum data rate of 500MHz, meaning that it can support high-speed data communications. It also has low-standby current and is designed to work under extreme conditions, making it suitable for a variety of applications.

The CD74ACT253M96 has a typical propagation delay of 5 nanoseconds and a typical input-to-output delay of 10 nanoseconds. It is also able to handle a maximum voltage of 4.5V and a maximum temperature of 85°C. This product is designed for applications that require a high data rate and reliable signal transmission, such as memory interconnects, high-speed bus systems, and point-to-point communications.

This product is often used in applications that require data decoding, and therefore signal separation, or multiplexing. For example, when multiplexing data, the CD74ACT253M96 can be used to separate a four-bit signal into two, two-bit signals. Alternatively, in a point-to-point communication system, two signals can be routed separately across different buses. This reduces the traffic on one single bus, thereby increasing the data rate.

The working principle of the CD74ACT253M96 is based on the use of three basic logic elements: a 1-input OR gate, a 1-input AND gate, and an inverter. The three inputs of the OR gate are connected to the three input bits of the data stream. The output of the OR gate is connected to one of the inputs of the AND gate. The other input of the AND gate is connected to the inverter, which has an input of the fourth data bit. The output of the AND gate is connected to the respective output.

The basic logic of the CD74ACT253M96 is that if the first three data bits of the input are the same, then the output is active-low. Alternatively, if the fourth bit is different, the output is active-high. This allows the product to distinguish between two different data streams and produce two separate outputs.

The CD74ACT253M96 is a versatile device that offers a wide range of applications and features. It has a low power consumption and is suitable for a variety of applications, including memory interconnects, high-speed bus systems, and point-to-point communications. It is a logic-based switch and can be used to route signals from one switch to another, multiplex data streams, and to decode strings of logic signals into specific paths.

The specific data is subject to PDF, and the above content is for reference