CD74HC4515M96

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74HC4515M96 is a low-power, high-speed CMOS logic device designed to act as a quad 2-input multiplexer with the possibility of decoding or inversion. It contains four independent two-input multiplexer with logic gates, each with selected data port (A and B) six select inputs (S0, S1, S2, S3, S4, S5) and output (Y). This device is capable of selecting one data line (A or B) from any four (Y0 - Y3) depending on the state of the select input. It also contains an active LOW enable input (G) for each multiplexer and also has an active LOW output enable input (OE), which when LOW enables all outputs. The main purpose of multiplexers is to select one binary value from one of the two binary values. This device has the ability to select one line from four lines (Y0 - Y3).

CD74HC4515M96 is a 16-pin device, especially suitable for today’s high-noise environments. The working voltage of this device should between 2V and 6V. The maximum frequency of operation is 70 MHz. The propagation delay time of LOW-to-HIGH at 4.5V VCC is typically 7.5 ns. Also, the power dissipation of this device is typically 230 µW. Low power dissipation, low input current and fast switching time are some of the advantages of this device. It is also immune to latchup and it performs the same logic levels independently of supply voltage from 4.5V to 2V.

This device is widely used in various applications. It is used in sample-and-hold circuits, analog-to-digital converters and digital-to-analog converters. It is also used in data selector/ multiplexer digital decoding applications, decoding binary data and address applications, decoding data and word line multiplexing. It is used in wide variety of communications applications, digital control systems, switching systems, memories and computer/logic systems. It is widely used in telecom and networking applications, especially when correct data transmission between network elements. It is also used in Datacom devices such as routers, modems, bridges, switches and firewalls.

The device can be used in applications where three more binary variables are connected to the select input. It is used in applications where two data sources are required to put together for output. It is also used for logic coding and decoding applications, where logic family of higher voltage tolerant inputs is desired.

The working principle of the CD74HC4515M96 is quite simple. When the enable input (G) is high, the selected output (Y) will receive the state of the selected data input (A or B). When the enable input (G) is low, the multiplexer output is disabled. The selected data input (A or B) will be determined by the active LOW output enable inputs (OE). When OE is low, the selected data input (A or B) will be determined by the select inputs (S0, S1, S2, S3, S4, S5).

In conclusion, the CD74HC4515M96 is a low-power, high-speed CMOS logic device designed to act as a quad 2-input multiplexer with the possibility of decoding or inversion. It is used in various applications such as sample-and-hold circuits, analog-to-digital converters, switching systems and memories. The working principle of this device is based on the enable input and selected data input in order to produce an output.

The specific data is subject to PDF, and the above content is for reference