CR5410-300

Frequency:	DC ~ 4kHz
Package / Case:	Module
Mounting Type:	DIN Rail, Panel
Polarization:	Bidirectional
Operating Temperature:	0°C ~ 50°C
Current - Supply (Max):	40mA
Response Time:	--
Voltage - Supply:	24V
Accuracy:	±1%
Linearity:	--
Series:	CR5400
Sensitivity:	--
Output:	Ratiometric, Voltage
Number of Channels:	1
Current - Sensing:	300A
Sensor Type:	Hall Effect, Closed Loop
For Measuring:	AC/DC
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CR5410-300 Overview of Current Transducers

Current transducers are class of electronic devices that sense an input current and convert it into an output voltage and, as such, are useful for measuring the amount of current flowing in an AC electrical circuit. The CR5410-300 is one such current transducer, and it is designed for applications requiring a reliable, accurate, and high-performance system.

The CR5410-300 is an isolation type transformer current sensing device, which utilizes a Rogowski coil. As a non-invasive or passive type sensor, it is used for applications requiring high precision current measurement. The Rogowski coil design provides the CR5410-300 with the ability to measure both positive and negative current waveforms up to a maximum of 300 amperes of current in one loop. This can be further extended by coupling multiple Rogowski coils. The CR5410-300 also offers an internal amplifier circuit and a linear waveform output of 0.5 volts per 1000 amperes.

The Rogowski coil employed in the CR5410-300 provides inherent galvanic isolation of the input and output. This means that the output of the device is not affected by fluctuations or buzz of the line voltage, thus minimizing the possibility of errors caused by interference. Further, the Rogowski coils are advantageous due to their low power consumption, low cost, and small size relative to other types of current transducer. This makes the CR5410-300 an ideal choice for applications with limited space or where size is a major consideration.

In addition to its superior accuracy and reliability, the CR5410-300 offers low-noise operation and a wide frequency range in excess of 600 kHz. This makes it suitable for use in a variety of applications, including: controlling current flow for differential shunt or busbar protection; measuring current in a single-phase or three-phase system; and monitoring the peak inrush current during motor start-up. The fact that it is non-invasive allows the device to be easily installed into existing power distribution systems without the need for any additional wiring.

When it comes to operation and installation of the CR5410-300, safety must always be the primary consideration. The device utilizes precision Rogowski coils and a high-powered amplifier circuit which require special considerations when installing. Furthermore, the electrical circuit which the transducer is being integrated into must be checked prior to installation to make sure it is safe to operate.

In summary, the CR5410-300 is a current transducer designed for applications requiring reliable, accurate, and high-performance current measurements. Its non-invasive design allows it to be integrated easily into existing systems, and its wide frequency range and low-noise operation make it suitable for a variety of applications. Of course, safety must always be a primary consideration when installing the CR5410-300, but, providing the correct precautions are taken, it offers a reliable and accurate solution to current measurements.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description