CT6ER504

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers are a type of mechanical electromechanical component used to adjust or tune electrical signals. The CT6ER504 is one type of trimmer potentiometer, designed for high performance applications with 0.35W to 1.5W rated power. This article will discuss the application field and working principle of the CT6ER504.

Application Field of CT6ER504

The CT6ER504 is a three-terminal trimmer potentiometer suitable for use in a wide range of applications, including audio, video, instrumentation, and communication systems. The circuit configuration can be used in surface-mount, through-hole, and press-fit packages. The potentiometer is especially suitable for low noise and high precision applications, with an operating temperature range of -40°C to +105°C.

The CT6ER504 can be used in a variety of applications, such as:

• Voltage dividers
• Adjusting the gain of amplifier
• Adjusting the bias point of tubes
• Adjusting the frequency of filters
• Adjusting the offset of A/D and D/A converters
• Tuning radio receivers
• Adjusting the zero point of weighing scales
• Adjusting the gain of oscillators
• Adjusting the balance of loudspeakers
• Controlling the amplitude of sound waves

The CT6ER504 is also suitable for use in medical, automotive, industrial, and consumer electronics applications.

Working Principle of CT6ER504

The CT6ER504 is a three-terminal trimmer potentiometer, meaning it has three connections - one for the signal input, one for the adjustable output, and one for ground. The signal is applied to the input, and the adjustable output voltage is set by turning the shaft of the potentiometer. The output voltage can be adjusted by turning the shaft clockwise or counterclockwise.

The CT6ER504 can be used to either increase or decrease the voltage, depending on the direction of rotation. The rotation of the shaft does not necessarily move the output voltage in the same direction though, due to the voltage divider action of the potentiometer. As the shaft is turned, the output voltage adjusts itself accordingly. The output voltage can be adjusted from 0V to 1.5V.

The resistance of the potentiometer can be adjusted with the shaft, and typically this is done in increments of 10 ohms. The resistance of the potentiometer is used to control the amount of current that can pass through it. This allows for precision control of the output voltage.

The CT6ER504 is designed to operate in a wide range of temperature and humidity environments. Its high-precision components ensure reliable operation and minimal drift in output voltage.

Conclusion

The CT6ER504 is a high performance trimmer potentiometer designed for use in a wide range of applications. The three-terminal design allows for precise and adjustable output voltages, and the adjustable resistance allows for control of current passing through the potentiometer. The CT6ER504 is well-suited for low noise and high precision applications, and its high-precision components guarantee reliable operation and minimal drift in output voltage.

The specific data is subject to PDF, and the above content is for reference