CW0101K750JB12

Series:	CW
Packaging:	Bulk
Part Status:	Active
Resistance:	1.75 kOhms
Tolerance:	±5%
Power (Watts):	13W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±30ppm/°C
Operating Temperature:	-65°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.375" Dia x 1.781" L (9.52mm x 45.24mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<h2>Through Hole Resistors</h2><p>The CW0101K750JB12 is a type of through-hole resistor, which is a physical type of resistor with two or more extended metal legs that are intended to be inserted into holes in a printed circuit board and soldered in place. It is a fixed resistor, also known as a resistive element, which has predetermined, rather than variable, electrical resistance. The CW0101K750JB12 resistor features a cylindrical body, as opposed to the conventional, flat configuration of other resistors.</p><h3>Application Field</h3><p>Through-hole resistors may be found in a variety of electronic circuits. Commonly, they are used in the input and output stages of integrated circuits, and may be encountered in amplifiers, timers, oscillators, and other types of circuit boards. The CW0101K750JB12 has excellent quality and stability, which means they are preferred for use in more demanding applications. Additionally, through-hole resistors are ideal for connecting components in circuits with high current levels and are able to handle large voltages.</p><p>Furthermore, these resistors are typically employed in integrated circuits to form a bias voltage or current source, or as a signal source that can be varied by the user. In such applications, they can often be found on the input side of an interface circuit. Once secured onto the board, their resistance behavior can be more easily monitored and fine tuned even after the board is completed.</p><h3>Working Principle</h3><p>The hot-stable CR0101K750JB12 resistor works on the principle that the resistance value is dependent on the materials that are used to make the resistor, and how much of those materials are present in the resistive element. In the case of traditional resistive elements, the resistor is usually made from a combination of carbon and ceramic, which can resist higher currents more efficiently than older ceramic-only models.</p><p>When a current runs through the resistive element, electrons flow along the access conductors, leaving out electrons behind, creating a resistance force. The amount of resistance depends on the total number of metal atoms present and the area of electron flow, creating a voltage across the resistor that is proportional to the current.</p><p>The CW0101K750JB12 resistor exhibits excellent temperature stability and power handling, allowing it to be used in environments with wide operating and ambient temperatures. This is important in applications where reliable, steady electrical performance is required over a lengthy period of time.</p><p>Through-hole resistors provide an effective solution for a variety of circuit design needs, especially in demanding applications where quality and stability are paramount. The CW0101K750JB12, in particular, offers excellent performance and reliable results even in extreme environmental conditions.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description