DG411LEDY-GE3

Voltage - Supply, Dual (V±):	±3 V ~ 8 V
Supplier Device Package:	16-SOIC
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	-114dB @ 1MHz
Current - Leakage (IS(off)) (Max):	1nA
Channel Capacitance (CS(off), CD(off)):	5pF, 6pF
Charge Injection:	6.6pC
-3db Bandwidth:	--
Switch Time (Ton, Toff) (Max):	50ns, 30ns
Series:	--
Voltage - Supply, Single (V+):	3 V ~ 16 V
Channel-to-Channel Matching (ΔRon):	--
On-State Resistance (Max):	26 Ohm
Number of Circuits:	4
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NC
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DG411LEDY-GE3 Application Field and Working Principle

In interface devices, analog switches, multiplexers, and demultiplexers have several practical applications. The DG411LEDY-GE3 is an analog switch multiplexer/demultiplexer device manufactured by Texas Instruments. This device can offer both analog and digital multiplexing/demultiplexing capabilities in a variety of real-world scenarios.This device integrates two 128 x 1 multiplexers/demultiplexers, four 16 x 1 multiplexers/demultiplexers, and eight 4 x 1 multiplexers/demultiplexers. These multiplexers/demultiplexers are all controlled with an enabling input. This enables and disables the multiplexers/demultiplexers so that only the correct data and signals are routed.The DG411LEDY-GE3 is a three-channel device. It has two 128 x 1 multiplexers/demultiplexers that are controlled by the two enable inputs, EA and EB. The four 16 x 1 multiplexers/demultiplexers are controlled by the two additional enable inputs, EA1 and EB1. The eight 4 x 1 multiplexers/demultiplexers are controlled by the four enable inputs, EA2, EA3, EB2, and EB3.In terms of functionality, this device can be used to multiplex data and signals into a single or parallel channel. It can be used to route signals from multiple sources to a single destination. It can also be used to perform demultiplexing. In this case, the device can split a single signal into multiple channels.In terms of applications, this device can be used in a variety of scenarios. It can be used in telecommunications and networking applications, where it provides switching for multiplexing, demultiplexing, and routing signals. It can be used in medical, industrial, and consumer electronics applications for data and signal routing.In terms of physical specifications, the DG411LEDY-GE3 is a 28-pin DIP case. The operating temperature range is from -55°C to +150°C and the storage temperature range is from -65°C to +150°C. The supply voltage is between 0 and 7.0 VDC. The device is available in 10K units and has a lead-free package.In terms of performance, the DG411LEDY-GE3 has a typical propagation delay of 6.2 ns, a typical power dissipation of 900 mW, and a typical noise immunity of 2.5 V/μs.In conclusion, the DG411LEDY-GE3 is an analog switch multiplexer/demultiplexer device manufactured by Texas Instruments. It is a 28-pin DIP case device that provides both analog and digital multiplexing/demultiplexing capabilities in a variety of real-world scenarios. The device can be used in telecommunications and networking applications, medical, industrial, and consumer electronics applications for data and signal routing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description