DMP10H4D2S-7 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DMP10H4D2S-7 is an SMD (Surface Mount Device) power MOSFET (metal-oxide-semiconductor field-effect transistor) that is made for high-density surface mounting applications. The MOSFET is used for switching and amplifying electronic signals. When used as a switch, it is capable of carrying large currents. It also has a low on-resistance, making it useful for low-voltage, high-current circuits.

Application field

The DMP10H4D2S-7 is used in applications where a high degree of control over current flow is desired, such as in the automotive industry. It can be used in the fuel injection system to control the amount of fuel delivered to the engine or in motor control to precisely regulate the speed. It can also be used for other automotive applications such as airbags, heated seats and systems for ABS (anti-lock braking systems).

This MOSFET is also suitable for industrial applications since it has a low on-resistance and is capable of controlling large amounts of current. It can be used for DC motor control, power supplies, voltage regulators and other high-current applications.

Working principle

The DMP10H4D2S-7 MOSFET is a voltage-controlled device consisting of four terminals - source, gate, drain and body. When an electrical signal is applied to the gate, it creates an electric field across the channel. This field changes the resistance of the channel, allowing current to flow from the source to the drain. The amount of current is determined by the voltage of the signal applied to the gate. The higher the voltage, the higher the current.

The MOSFET can be used as a switch or amplifier. When used as a switch, the source and drain are connected to two different components or pins, and the gate is connected to a control signal. When the control signal is high, the MOSFET is turned on and current flows from the source to the drain. When the control signal is low, the MOSFET is turned off and no current flows. When used as an amplifier, the source and drain are connected to the same component or pin and the gate is connected to a control signal. The amplified signal is then sent to the component or pin that is connected to the source and drain.

The DMP10H4D2S-7 is a high-power, low-on-resistance MOSFET that is capable of controlling large currents. It is used in a wide range of applications, from automotive to industrial, and is an essential component for producing precise control over current flow.

The specific data is subject to PDF, and the above content is for reference