DPX165850DT-8117A1 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF diplexers are components within antennas, transceivers, and other types of radio frequency (RF) communications systems that enable separate signal bands to be transmitted across one device. The DPX165850DT-8117A1 is an example of such a component, providing a cost-effective and reliable solution for applications that require wide frequency separation of two separate signal bands. In this article, we will discuss the application fields and working principle of the DPX165850DT-8117A1 RF diplexer.

Application Fields of the DPX165850DT-8117A1 RF Diplexer

The DPX165850DT-8117A1 is a low power RF diplexer that is designed for applications in the 811.7 MHz to 860.7 MHz bandwidth. It is ideally suited for applications such as cellular phone systems, WiFi, and other wireless local area networks, where the simultaneous transmission of two separate signal bands is required. The diplexer offers a high degree of isolation between the input signals and its insertion loss is low enough to ensure high signal-to-noise ratios in the final output. Additionally, the DPX165850DT-8117A1 has an excellent dynamic range, allowing it to be used in locations where the signal strength can vary significantly.

Working Principle of the DPX165850DT-8117A1 RF Diplexer

The working principle of the DPX165850DT-8117A1 is based on the principle of waveguide splitting. This involves the use of a waveguide element that is divided into two paths, each one carrying a different frequency or bandwidth. The dividing element used in the DPX165850DT-8117A1 is a combination of a low pass filter and a high pass filter. Each of these two filters separate the lower frequencies from the higher frequencies, allowing them to travel along separate paths to their respective antennas and other communication devices. This technique also ensures excellent levels of isolation between the two signal bands, reducing any potential interference.

To further enhance the performance of the DPX165850DT-8117A1, it also contains a bandpass filter. This filter ensures that any unwanted noise or interference from outside the signal band is greatly reduced, resulting in a clear and reliable communication signal. Additionally, the diplexer employs a reverse-shepardsic filter to attenuate any internally generated noise from within the device.

Conclusion

The DPX165850DT-8117A1 is an excellent choice for applications that require separate transmission of two signal bands in the 811.7 MHz to 860.7 MHz bandwidth. The device utilises waveguide splitting to separate the frequencies, combined with a bandpass filter for further noise reduction. In addition, the device also features a reverse-shepardsic filter to further attenuate any internally generated noise. With its low power consumption and high dynamic range, the DPX165850DT-8117A1 makes an ideal solution for both commercial and consumer applications.

The specific data is subject to PDF, and the above content is for reference