DS2482S-100+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DS2482S-100+ is an interface that is used as a bridge between I2C and 1-Wire devices. It provides access to the 1-Wire bus from I2C-compatible devices and vice versa and can be used to interface between microcontrollers and the 1-Wire peripheral family. It is an ideal solution for integrating a microcontroller or an embedded device with the 1-Wire bus.

The DS2482S-100+ is an I2C-to-1-Wire bridge controller. It supports both standard and high speed I2C communications and includes an on-board processor and memory. The device also provides a master-initiated interrupt to indicate when there is a slave device on the 1-Wire bus. The DS2482S-100+ provides the capability to connect 1-Wire devices and microcontrollers with a single connection, eliminating the need for multiple I2C and 1-Wire control pins.

The DS2482S-100+ includes a low power mode feature which enables it to enter a low power state when the 1-Wire bus is inactive. This reduces power consumption during periods of inactivity and extends the battery life of smart cards and 1-Wire devices. The DS2482S-100+ is designed for use in a variety of 1-Wire applications, including home automation and medical equipment.

The DS2482S-100+ has several features that make it ideal for embedded applications. First, it supports multiple 1-Wire operation modes, allowing a wide variety of 1-Wire peripheral devices to be connected to the 1-Wire bus. The device also supports up to 128 bytes of 1-Wire EEPROM, which can be accessed and programmed via the I2C bus. Finally, the device incorporates advanced 1-Wire routines and algorithms that simplify the integration of 1-Wire applications with microcontrollers.

The working principle of the DS2482S-100+ is fairly simple. The device acts as a bridge between the I2C and 1-Wire busses and supports both read and write transactions. The DS2482S-100+ detects activity on the 1-Wire bus and then acts as a master controller on the 1-Wire bus. It then initiates the I2C transactions and passes the relevant 1-Wire data to and from the device.

The DS2482S-100+ is a low cost, easy to use interface that provides a reliable connection between embedded microcontrollers and the 1-Wire family of peripheral devices. It is widely used to enable the integration of a variety of 1-Wire applications into embedded systems. The DS2482S-100+ is suitable for a wide range of applications, including industrial automation, automotive, medical, consumer electronics and home automation.

By providing an easy to use, reliable, low power interface between 1-Wire devices and microcontrollers, the DS2482S-100+ simplifies the development of embedded 1-Wire applications. It is an ideal choice for designers who require an easy to use, low cost, low power solution for I2C/1-Wire designs.

The specific data is subject to PDF, and the above content is for reference