DS2E-S-DC12V-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DS2E-S-DC12V-R is a signal relay typically used in automotive, commercial or industrial applications. It is designed to control the electrical current flow of up to 2 A. The relay is a latching type relay, which means it does not need to be constantly powered for it to hold the contact in place. The relay has a five-pin base and is available in both normally open (NO) and normally closed (NC) versions.

The relay has a single electrical input, making it easier to install. It can be activated by a single pulse, meaning that continuous and momentary contacts can be made using the relay. This can be done using a single wire, making the device easier to install and use.

The relay’s working principle is based on simple electromechanical action. When voltage is applied to the relay’s input, a solenoid pulls a lever which in turn pulls another lever and activate the contact. When the voltage is removed, the contacts remain in the same position, allowing for latching. The relay also has an LED, to indicate when the current is passing through the contact.

The DS2E-S-DC12V-R is primarily used when there is a need to control the electrical current of small loads, such as lighting, low-power motors or pumps. It is also used in alarm and security systems, and for the automation of various functions. It is often used in automotive applications where the control of the electrical current needs to be done at a distance.

The relay is easy to install and use and can handle up to 2 A of current. With its latching mechanism, it can be used to control momentary or continuous functions. It is available in both NO and NC versions, allowing for more flexibility. It is also available in a variety of voltages, making it suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference