DSC1124CL2-200.0000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic components used to generate a repetitive digital or analog signal with particular frequency characteristics. Oscillators are used in many applications, from computers and digital-to-analog converters, to radar systems and automotive engine controllers. A particular type of oscillator is the DSC1124CL2-200.0000, a surface mount device suitable for a variety of applications. This article examines the application field and working principle of this device.

The DSC1124CL2-200.0000 is a versatile surface mount oscillator designed for applications that require a precision frequency signal. The oscillator can operate in temperatures ranging from -40°C to +85°C, and offers a wide range of frequencies from 200 kHz to 200 MHz. The component provides a regulated supply voltage of 5V, with a maximum current consumption of 20mA. The output impedance of the oscillator is 200 ohms with a maximum load of 5V. The accuracy of the oscillator is specified to within ±1%, while jitter is typically less than ±0.2%.

The applications of the DSC1124CL2-200.0000 surface mount oscillator are many and varied. In digital systems, the oscillator can be used to generate a stable clock signal for data transfer, timing, and synchronization. In industrial applications, the oscillator is suitable for controlling motors, pumps and other mechanical components. The oscillator can also be used in wireless communications, audio/video signals, and radio/Television transmission systems. In addition, the oscillator is suitable for auto-tuning of analog circuits thanks to its low frequency range.

The working principle of the DSC1124CL2-200.0000 is based on the principle of the oscillator circuit. The circuit is comprised of four main components - an amplifier, two capacitors, and a resistor. The amplifier is biased such that it is operating at its unity-gain point. The two capacitors are connected in parallel to the amplifier, and are used to provide positive and negative feedback to the amplifier. The resistor is used to control the frequency of oscillations. The frequency is determined by the value of the capacitors and resistor. When the amplifier is supplied with an input signal, the two capacitors cause the amplifier to oscillate between two levels, generating a repetitive waveform.

In summary, the DSC1124CL2-200.0000 is a versatile surface mount oscillator suitable for a variety of applications. The device can operate in temperatures ranging from -40°C to +85°C, and offers a wide range of frequencies from 200 kHz to 200 MHz. The component can be used in digital systems, industrial applications, wireless communications, audio/video signals, and radio/TV transmission systems. The working principle of the oscillator is based on the oscillator circuit, and is comprised of an amplifier, two capacitors, and a resistor.

The specific data is subject to PDF, and the above content is for reference