DSC400-1111Q0110KE1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators are commonly used in the modern electronic systems. The DSC400-1111Q0110KE1 is a part of this family, which was designed to provide a wide range of frequency selection and a high reliability. It is designed to quickly provide different frequency settings as per requirement.

The DSC400-1111Q0110KE1 oscillator is based on a conventional temperature compensated crystal oscillator (TCXO) concept. It works on the principle of frequency synchronisation which involves the use of a combination of active and passive components to provide an electrical signal to determine the generated frequency. The signal is generated using a combination of the resistor and the capacitor which is known as the frequency setting circuit. The frequency setting circuit is connected to the output pin of the oscillator.

The DSC400-1111Q0110KE1 oscillator has two modes for frequency selection – continuous (C) mode and discrete (D) mode. In continuous mode, the frequency can be adjusted continuously by the oscillator through a variety of resistor and capacitor combinations. This results in a wide range of frequency options which can be selected. In discrete mode, the frequency is pre-defined through selectable power and control pins. This mode allows the user to select a single frequency that is closest to their requirement and can then follow the rules as per the operating manual.

The DSC400-1111Q0110KE1 oscillator has a number of applications, primarily in telecommunications and information technology. It is used in a wide range of applications such as frequency synthesizers, logic and digital signal processing, frequency divider, voltage control oscillators, clock converters and frequency detectors. It is also used in radio frequency (RF) and microwave systems, test and measurement equipment, and in computers and embedded systems. This oscillator is ideal for applications which require high frequency stability, accuracy and high output levels.

The DSC400-1111Q0110KE1 oscillator is ideal for applications that require wide frequency selection and a high level of reliability. It supports both continuous and discrete frequency selection, which allows for the user to select the frequencies that best suits their application. Additionally, this oscillator is also capable of providing high levels of outputs and accuracy, making it ideal for use in a wide range of electronic systems.

The specific data is subject to PDF, and the above content is for reference