ECO-S1HA822DA

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.850" (47.00mm)
Size / Dimension:	1.181" Dia (30.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ High Frequency:	4.14A @ 100kHz
Ripple Current @ Low Frequency:	3.6A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	TS-HA
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	3000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	38 mOhm @ 120Hz
Voltage - Rated:	50V
Tolerance:	±20%
Capacitance:	8200µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are widely used in a variety of electrical and electronic equipment due to their advantages of low cost, high energy density, and wide range of working voltages. The ECO-S1HA822DA is an example of an aluminum electrolytic capacitor and is frequently used in industrial applications.The ECO-S1HA822DA is an Aluminum Electrolytic Capacitor with a long life span and high stability due to its low AC impedance. It features high capacitance with rated voltage of 25V and operating temperature between -25°C to 85°C. It has a capacitance ranging from 10uF to 4700uF and a tolerance of ±20%. The housing of the ECO-S1HA822DA is made from epoxy resin which is flame retardant and moisture resistant.The ECO-S1HA822DA offers excellent energy storage and is suitable for general purpose and low-frequency switching such as motor start-up. It is primarily used in applications such as switch mode power supplies, logic circuit and AC power line filters. The ECO-S1HA822DA is also used in consumer electronic products and automotive applications such as car audio systems and lighting.The capacitor has two aluminum foils coated with an electrolyte, separated by a polarizing film and rolled up in a cylindrical shape. When voltage is applied to the terminals of the capacitor, current flows through the electrolyte from the anode foil to the cathode foil, resulting in a storage of electrical charge. The type and amount of charge stored depends upon the voltage, capacitance, and dielectric of the capacitor.In conclusion, the ECO-S1HA822DA is an aluminum electrolytic capacitor that offers excellent energy storage and long life span. Its housing is made from epoxy resin which protects it from moisture and heat. It is suitable for a wide range of applications such as general purpose and low-frequency switching, AC power line filters, logic circuits, and automotive applications.

The specific data is subject to PDF, and the above content is for reference