ECS-480-18-33-JGN-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals are essential components of many electronic devices, and the ECS-480-18-33-JGN-TR is no exception. In this article, we will discuss the application field and working principle of this crystal.Crystals, such as the ECS-480-18-33-JGN-TR, are used in circuits to ensure signal consistency, detect signals, and generate precise frequency signals, among many other uses. The electrical properties of the crystal determine how it can be used within a circuit. The ECS-480-18-33-JGN-TR features a frequency of 18.432 MHz, a insulation resistance of 100M, a start frequency of 14.5 MHz, and a shunt capacitance of 6.3pf.The ECS-480-18-33-JGN-TR crystal is most commonly used in supervisory circuits that require a precise frequency signal for accurate and efficient operation. It is typically used in timing applications such as those found in radio receivers, and it is also often used in circuits that require a steady pulse rate.The crystal\'s application field and working principle can be explained using the example of a PLL (Phase Locked Loop) circuit. The PLL circuit uses feedback from the ECS-480-18-33-JGN-TR crystal to produce a steady and accurate frequency signal. The crystal is driven by an input voltage and its frequency is measured using a reference frequency generator. The two signals are compared, and a modulated signal is generated if the measured frequency is not equal to the reference. This signal is then fed back to the input voltage, causing it to be adjusted until the measured frequency equals the reference frequency. The crystal\'s output is then in-phase with the reference, resulting in a steady and precise frequency signal.Another application field for the ECS-480-18-33-JGN-TR crystal is in oscillator circuits. These circuits consist of the crystal, an amplifier stage, and an output mixer stage. The crystal\'s frequency is the output signal of the circuit, and the amplifier and output stages are used to adjust the signal\'s amplitude and filter noise from the output. Oscillator circuits are commonly used in communication systems, data synchronization systems, and power amplification systems.The ECS-480-18-33-JGN-TR crystal is also commonly used in circuits that detect signals. The frequency of the crystal acts as a reference signal, and the circuit compares the reference to the input signal. When the two signals are in-phase, the circuit will detect the signal and generate an output. This type of circuit is often used in frequency-hopping communication systems and radio receivers.Finally, the ECS-480-18-33-JGN-TR crystal is used in circuits where a consistent and precise frequency output is required. For example, it is often used in pager systems, which require a steady frequency pulse in order to receive information.In conclusion, the ECS-480-18-33-JGN-TR crystal is a versatile component that is used in a variety of circuit applications where a precise frequency is needed. The crystal can be used in PLL circuits, oscillators, frequency detection circuits, and pager systems, among other applications. It is easy to see why this crystal is such a popular choice among electronic designers of all types.

The specific data is subject to PDF, and the above content is for reference