ECX-H25CM-125.000

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.051" (1.30mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	40mA
Operating Temperature:	-20°C ~ 70°C
Series:	ECSpressCON™ ECX-H
Voltage - Supply:	2.5V
Output:	HCMOS
Function:	Enable/Disable
Frequency:	125MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ECX-H25CM-125.000 Oscillators

Oscillators are electronic circuits that are used to generate a periodic signal. Common types of oscillators include voltage-controlled, current-controlled, and frequency-controlled oscillators (VCOs, CCOs, and FCOs). ECX-H25CM-125.000 oscillators are one type of oscillators.

Application Field of ECX-H25CM-125.000 Oscillators

ECX-H25CM-125.000 oscillators can be used in a wide range of applications. Some of the most common uses for these oscillators include digital communications, such as spread spectrum, their use in digital audio systems, automotive applications, and data transmission.These oscillators are also widely used in industrial automation and for their intrinsic stability. Their high-frequency capabilities make them ideal for applications such as radio transmitters and receivers, and for high-speed data transfer. They are also used in consumer products where high-frequency stability is essential.

Working Principle of ECX-H25CM-125.000 Oscillators

The working principle of ECX-H25CM-125.000 oscillators is based on the electrical properties of a crystal. By properly forming and operating an electrical circuit around the crystal, it can be made to vibrate at its natural frequency. This vibration, combined with electronic circuitry, enables the oscillator to produce a periodic signal.The signal produced by the oscillator may be a very simple waveform, such as the sine wave used in many communications applications, or it may be a series of pulses, such as the ones found in digital data transmissions. The frequency of the signal is determined by the properties of the crystal, but it can be adjusted by varying the electrical circuits around the crystal.ECX-H25CM-125.000 oscillators are specifically designed for high-frequency applications, and they are constructed using a technique known as “piezo-electricity”. In this method, a sliver of quartz crystal is subjected to an alternating electrical current, causing the crystal to vibrate mechanically. This vibration is then transferred to the electrical circuit, causing it to produce a periodic signal. The frequency of the signal produced by ECX-H25CM-125.000 oscillators can be accurately tuned by varying the electrical circuits. This allows the oscillator to be used in a wide variety of applications, including frequency-sensitive ones such as radio communications.

Conclusion

ECX-H25CM-125.000 oscillators are an important type of oscillator used in a variety of applications. They are designed specifically for high-frequency applications, and their construction is based on the piezo-electricity principle. Their frequency can be tuned accurately by varying the electrical circuits, and they are widely used in telecommunications, industrial automation, and consumer products.

The specific data is subject to PDF, and the above content is for reference