EEE-HC1V330XP

Series:	HC
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	33µF
Tolerance:	±20%
Voltage - Rated:	35V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	3000 Hrs @ 105°C
Operating Temperature:	-40°C ~ 105°C
Polarization:	Polar
Ratings:	AEC-Q200
Applications:	Automotive
Ripple Current @ Low Frequency:	57mA @ 120Hz
Ripple Current @ High Frequency:	96.9mA @ 10kHz
Lead Spacing:	--
Size / Dimension:	0.248" Dia (6.30mm)
Height - Seated (Max):	0.303" (7.70mm)
Surface Mount Land Size:	0.260" L x 0.260" W (6.60mm x 6.60mm)
Mounting Type:	Surface Mount
Package / Case:	Radial, Can - SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors (AECs) are electrical components that allow a flow of electricity to be restricted or directed based on the physical characteristics of the component. They are among the most commonly used components in a variety of applications. The EEE-HC1V330XP is an aluminum electrolytic capacitor that is intended for the use in higher ripple current requirements. It is especially suited for applications where the output voltage ripple needs to be reduced while still providing efficient and reliable operation. The EEE-HC1V330XP is a high-temperature polymer-type aluminum electrolytic capacitor that has two or three terminals depending on the version. It is constructed using a solid aluminum electrolyte and a solid polymer case with leads connected to the capacitors\' terminals. The capacitance value of the EEE-HC1V330XP ranges from 2.2μF to 330μF. The temperature range for this capacitor is between -55°C to 105°C with a maximum voltage rating up to 450V. The product is designed with a high capacitance which allows for greater current carrying capacity. The working principle of the EEE-HC1V330XP involves the basic principles of capacitance. Capacitance is the ability of an electrical component to store electric charge. This is achieved when two conductive surfaces are separated by an insulating material. The EEE-HC1V330XP has two electrodes that are separated by an electrolyte. When in operation, charge will accumulate on one of the plates while the other plate will remain at neutral potential. The difference between the two voltages can be used to drive a current, which is what powers the device. The EEE-HC1V330XP is mainly used in power-supply DC/DC converters. Its capacitance helps to reduce the output voltage ripple and improve the smoothness of the output from the converter. This also helps to improve the efficiency of the power supply, as the performance is improved without the need for additional active components. The EEE-HC1V330XP is also used in power factor correction and industrial motor control circuits. In both of these applications, the capacitance helps to reduce power consumption and improve power factor.The EEE-HC1V330XP is also suitable for the automotive electronics and automotive sensors industries. The high capacitance and high voltage ratings of the capacitor help to ensure reliable operation even in harsh environmental conditions. The EEE-HC1V330XP is also used in battery charging applications and audio circuits. The capacitor helps reduce the voltage drop across the battery while charging, and also reduces noise in audio applications. The EEE-HC1V330XP is a reliable and economical aluminum electrolytic capacitor that is designed for a wide range of applications. Its high capacitance, voltage rating and temperature range make it suitable for a variety of uses, from reducing ripple in power supplies to providing noise and distortion reduction in audio circuits.

The specific data is subject to PDF, and the above content is for reference