EEV-FC1V100R Allicdata Electronics

EEV-FC1V100R Capacitors

Allicdata Part #:

PCE3118TR-ND

Manufacturer Part#:

EEV-FC1V100R

Price: $ 0.00
Product Category:

Capacitors

Manufacturer: Panasonic Electronic Components
Short Description: CAP ALUM 10UF 20% 35V SMD
More Detail: 10µF 35V Aluminum Electrolytic Capacitors Radial, ...
DataSheet: EEV-FC1V100R datasheetEEV-FC1V100R Datasheet/PDF
Quantity: 1000
Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
Moisture Sensitivity Level (MSL): 1 (Unlimited)
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Ratings: AEC-Q200
Applications: Automotive
Ripple Current @ Low Frequency: 71.25mA @ 120Hz
Ripple Current @ High Frequency: 95mA @ 100kHz
Impedance: 1.8 Ohms
Lead Spacing: --
Size / Dimension: 0.197" Dia (5.00mm)
Height - Seated (Max): 0.213" (5.40mm)
Surface Mount Land Size: 0.209" L x 0.209" W (5.30mm x 5.30mm)
Mounting Type: Surface Mount
Package / Case: Radial, Can - SMD
Series: FC
Packaging: Tape & Reel (TR) 
Lead Free Status / RoHS Status: --
Part Status: Obsolete
Moisture Sensitivity Level (MSL): --
Capacitance: 10µF
Tolerance: ±20%
Voltage - Rated: 35V
ESR (Equivalent Series Resistance): --
Lifetime @ Temp.: 1000 Hrs @ 105°C
Operating Temperature: -40°C ~ 105°C
Polarization: Polar
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors come in a variety of sizes and styles, including axial, radial, miniature snap-in and screw terminal versions. The EEV-FC1V100R is a axial style polarized aluminum electrolytic capacitor with a voltage rating of 100V and a capacitance of 1 μF. It is designed for general purpose use in AC and lighting applications, as well as DC, automotive, industrial and consumer electronic applications.

To understand the working principle of the EEV-FC1V100R, it’s important to understand the structure and composition of aluminum electrolytic capacitors. Such capacitors are constructed from two aluminum foils inside an electrolyte tank. The outer foil serves as the positive terminal and the inner foil serves as the negative terminal. The two foils are separated by a thin insulating membrane called an electrolyte layer. This layer helps to prevent the electrolyte in the tank from shorting out the two terminals of the capacitor.

When there is an electric charge applied to the outer foil, it causes an electric field to be formed between the two foils. This electric field accumulates electrons on the inner foil and creates a charge on the inner foil that is equal and opposite to the charge on the outer foil. As a result, when a DC voltage is applied across the two terminals of the capacitor, current will flow from one terminal to the other as the capacitor charges up.

The EEV-FC1V100R also incorporates a safety vent to help protect against overpressure. This safety vent usually consists of a thin diaphragm that is installed on the top of the capacitor case. When the internal pressure of the capacitor increases due to excessive voltage or temperature, the diaphragm will burst, allowing the pressure to be released safely.

The EEV-FC1V100R is typically used in high frequency, high current applications where high ripple currents are present. Such applications can include switching power supplies, DC-DC converters, AC-DC rectifiers and battery chargers. In addition, the EEV-FC1V100R is also suitable for use in motor drive circuits, voltage multiplying, voltage divider and RC filter circuits.

Although the EEV-FC1V100R is a reliable and reliable capacitor, its failure rate is still higher than other types of capacitors due to the corrosive nature of the electrolyte and its tendency to become hot over time. As such, it’s important to regularly monitor the EEV-FC1V100R for any signs of increased temperature or leakage. Additionally, it’s essential to take proper care of the capacitor by ensuring that it’s mounted properly and stored in an appropriate temperature and humidity controlled environment.

In summary, the EEV-FC1V100R is an axial style polarized aluminum electrolytic capacitor with a voltage rating of 100V and a capacitance of 1 μF. It is designed for general purpose use in AC and lighting applications, as well as DC, automotive, industrial and consumer electronic applications. The capacitor incorporates a safety vent, and is typically used in high frequency, high current applications where high ripple currents are present.

The specific data is subject to PDF, and the above content is for reference

Latest Products
UUJ2G330MNQ6ZD

CAP ALUM 33UF SMD33F 400V Aluminum Elect...

UUJ2G330MNQ6ZD Allicdata Electronics
UUJ2G330MNQ6MS

CAP ALUM 33UF SMD33F 400V Aluminum Elect...

UUJ2G330MNQ6MS Allicdata Electronics
UUJ2E680MNQ6ZD

CAP ALUM 68UF SMD68F 250V Aluminum Elect...

UUJ2E680MNQ6ZD Allicdata Electronics
UUJ2E680MNQ6MS

CAP ALUM 68UF SMD68F 250V Aluminum Elect...

UUJ2E680MNQ6MS Allicdata Electronics
UUJ2D101MNQ6ZD

CAP ALUM 100UF SMD100F 200V Aluminum Ele...

UUJ2D101MNQ6ZD Allicdata Electronics
UUJ2D101MNQ6MS

CAP ALUM 100UF SMD100F 200V Aluminum Ele...

UUJ2D101MNQ6MS Allicdata Electronics