EKY-350ETD471MJ20S

Series:	KY
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	470µF
Tolerance:	±20%
Voltage - Rated:	35V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	7000 Hrs @ 105°C
Operating Temperature:	-40°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	700mA @ 120Hz
Ripple Current @ High Frequency:	1.4A @ 100kHz
Impedance:	46 mOhms
Lead Spacing:	0.197" (5.00mm)
Size / Dimension:	0.394" Dia (10.00mm)
Height - Seated (Max):	0.846" (21.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are used in virtually every application and electronic project imaginable. They are widely used in filter circuits, power amplifiers, and other various applications. The EKY-350ETD471MJ20S is a type of aluminum electrolytic capacitor and is one of the most common ones. It is a non-polarized electrolytic capacitor and is most often used in audio applications.The design of the EKY-350ETD471MJ20S is as follows: it has a maximum operating temperature of 105 degrees Celsius, a clamping voltage of 6.3 volts, and has a rated voltage of 50 volts. This makes it suitable for use in a variety of applications where its high operating temperatures and clamping voltage are not an issue. Additionally, this type of capacitor is very common and can usually be found in most electronic stores.The EKY-350ETD471MJ20S also has a working principle. The main design feature of these capacitors is that they are constructed from two large aluminum plates with an insulating anode-cathode separator or dielectric, and a thin porous layer of electrolyte. An electric charge is sent through the electrolyte, which results in a positive charge on one side of the plates and a negative charge on the other. This creates a voltage across the capacitor, which is in turn directly proportional to the size of the plates and the distance between them. This voltage is then used to power the project or application in question.In addition to their primary use, aluminum electrolytic capacitors can also be used as low-pass filters, power decoupling capacitors, shield capacitors, radio frequency chokes, and various types of timing devices. They are also reliable, provide excellent heat stability, and can operate at temperatures about twice as high as their temperature rating. Moreover, these types of capacitors are popular in modern audio applications, due to their excellent frequency response, low distortion, and good noise performance. They are also ideal for use in power supply circuits, where it is especially important to keep the power supply clean and accurate. In short, the EKY-350ETD471MJ20S is a type of aluminum electrolytic capacitor and is one of the most popular ones. It features a maximum operating temperature of 105 degrees Celsius, a clamping voltage of 6.3 volts, and has a rated voltage of 50 volts. It is used in a variety of applications and is especially popular in audio applications. The working principle of the capacitor consists of two large aluminum plates with an insulating dielectric and a thin porous layer of electrolyte. By utilizing this principle, a voltage is created across the capacitor which is then used to power the application in question.

The specific data is subject to PDF, and the above content is for reference