EL208(TA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that are used to protect the primary circuit from electronic interference from the secondary circuit. It prevents electrical transients or noise generated by the secondary circuit from interfering with the primary circuit. The EL208(TA) optoisolator is a type designed with a transistor-photovoltaic output. It consists of a few components, including a light-emitting diode, a photo-detector, and a transistor-transistor logic (TTL) dropout voltage regulator.

The primary circuit is the circuit that generates the electronic interference. It is typically a digital circuit that generates a pulse train that is converted into light. This light is then sent to the secondary circuit where it is converted back into electrical pulses. The EL208(TA) optoisolator acts as an isolation barrier between the two circuits and prevents the interference from crossing over.

The EL208(TA) optoisolator works by having a light-emitting diode on one end and a photo-detector on the other end of the device. The light from the diode is detected by the detector which, in turn, triggers a transistor driver. This driver sends a signal to the TTL dropout voltage regulator, which then converts this signal into an electrical voltage for use in the primary circuit.

This optoisolator is a great choice for applications where electrical interference needs to be eliminated and isolation of the primary and secondary circuits is desired. It is also suitable for use in systems that require a higher level of electrical security such as medical equipment, telecommunications, or automotive electronics. With its simple construction and excellent performance, the EL208(TA) optoisolator is an ideal option for both residential and commercial applications.

The EL208(TA) optoisolator is a device that is designed to be used in circumstances where electrical interference from the primary circuit needs to be prevented from contaminating the secondary circuit. It consists of a light-emitting diode and a photosensitive device that detects the light from the diode, which is then amplified and used to trigger the transistor driver. This then sends a signal to the TTL dropout voltage regulator that converts the signal into an electrical voltage for use in the primary circuit. This optoisolator is a great choice for applications where electrical interference needs to be eliminated and isolation of the primary and secondary circuits is desired.

The specific data is subject to PDF, and the above content is for reference