| Allicdata Part #: | ELJ-NCR47KF-ND |
| Manufacturer Part#: |
ELJ-NCR47KF |
| Price: | $ 0.00 |
| Product Category: | Inductors, Coils, Chokes |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | FIXED IND 470NH 125MA 1.58 OHM |
| More Detail: | 470nH Unshielded Wirewound Inductor 125mA 1.58 Ohm... |
| DataSheet: |  ELJ-NCR47KF Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| DC Resistance (DCR): | 1.58 Ohm Max |
| Height - Seated (Max): | 0.071" (1.80mm) |
| Size / Dimension: | 0.098" L x 0.079" W (2.50mm x 2.00mm) |
| Supplier Device Package: | 1008 (2520 Metric) |
| Package / Case: | 1008 (2520 Metric) |
| Mounting Type: | Surface Mount |
| Inductance Frequency - Test: | 25.2MHz |
| Operating Temperature: | -20°C ~ 85°C |
| Ratings: | -- |
| Frequency - Self Resonant: | 160MHz |
| Q @ Freq: | 10 @ 25.2MHz |
| Series: | NC |
| Shielding: | Unshielded |
| Current - Saturation: | -- |
| Current Rating: | 125mA |
| Tolerance: | ±10% |
| Inductance: | 470nH |
| Material - Core: | Non-Magnetic |
| Type: | Wirewound |
| Part Status: | Obsolete |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Inductors are one of the essential components in power electronics. Fixed inductors are the most commonly used inductors in power electronics because they are relatively low in cost, are easy to control and don\'t take up a lot of space. The ELJ-NCR47KF is an example of a fixed inductor that is used in power electronics. This article will discuss the application field and working principle of the ELJ-NCR47KF.
The ELJ-NCR47KF is a surface-mount wire-wound inductor used in power electronics. It is a highly reliable inductor that can be used in a variety of different applications, including switch-mode power supplies, EMI/RFI filters, RF power amplifiers, and motor drive controllers. It has an inductance of 47mH, a rated current of 1.2A, and a rated voltage of 15V.
The ELJ-NCR47KF uses a type of windings called axial windings. This type of winding is achieved by using a coil of wire placed encased in an axial core material (usually plastic). The wire is then wound around the core, which creates a magnetic field. The coil is then sealed with insulation and encapsulated to protect it.
The windings of the ELJ-NCR47KF are wound so that the magnetic field generated is able to store energy. This energy is stored in the form of a magnetic flux and can be released quickly and efficiently. The inductor then able to supply current for short periods of time, even when the input voltage is low or zero.
The ELJ-NCR47KF also has an impedance which is proportional to the inductance. This means that it can limit the current flow through the inductor and protect the device from damage due to overcurrent. This is particularly important in applications where the power supply is prone to surges or voltage drops.
The ELJ-NCR47KF is a versatile inductor that can be used in a variety of power electronics applications. It has a relatively low inductance, a high current rating, and strong impedance characteristics. This allows it to be used in a wide range of power electronics applications that require an inductor with good performance and reliability.
The specific data is subject to PDF, and the above content is for reference
FIXED IND 10UH 590MA 350 MOHM10H Unshiel...
FIXED IND 22NH 1.4A 70 MOHM SMD22nH Unsh...
FIXED IND 13NH 600MA SMD13nH Unshielded ...
FIXED IND 680UH 210MA 4.6 OHM680H Unshie...
FIXED IND 470UH 1.3A 280 MOHM TH470H Uns...
FIXED IND 8.2UH 165MA 2.2 OHM TH8.2H Uns...