ELXV630EC3470MH12D

Series:	LXV
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	47µF
Tolerance:	±20%
Voltage - Rated:	63V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	3000 Hrs @ 105°C
Operating Temperature:	-55°C ~ 105°C
Polarization:	Polar
Ratings:	AEC-Q200
Applications:	Automotive
Ripple Current @ Low Frequency:	55mA @ 120Hz
Ripple Current @ High Frequency:	275mA @ 100kHz
Impedance:	490 mOhms
Lead Spacing:	0.138" (3.50mm)
Size / Dimension:	0.315" Dia (8.00mm)
Height - Seated (Max):	0.532" (13.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are a type of capacitor that uses aluminum as an anode with a solvent-soaked paper separator electrolyte as cathode. This type of capacitor is widely used in electronic devices due to its high capacitance, low cost, and high reliability.In the market nowadays, there are two structural categories for aluminum electrolytic capacitors---radial leaded and surface-mount. The ELXV630EC3470MH12D Aluminum Electrolytic Capacitor is a radial leaded molded aluminum electrolytic capacitor with liquid electrolyte. This type of capacitor also has a long life expectancy and is most commonly used in switching power supply and power supply board.

Application Field and Working Principle

As the name implies, the ELXV630EC3470MH12D Aluminum Electrolytic Capacitor is primarily used in switching power supply and power supply board application. The boiling point stabilizing technology used by the ELXV630EC3470MH12D increases the electrolyte boiling point and helps to reduce the chance of positive and negative dielectric rupture, which inevitably decreases the risk of circuit failure and keeps the cooling area cooler without the need for additional fans. Regarding its working principle, the ELXV630EC3470MH12D capacitor is connected in a typical low-frequency ac or dc application. Traditionally, a dielectric layer of aluminum oxide forms the inner layer between the anode (aluminum) and the cathode (electrolyte). The charge carriers of the electrons form a charge in the dielectric and store the electrical energy like a battery. However, the voltage that is applied to the capacitor causes oxide layers of the dielectric to break down and creates a electric field between the anode and the cathode. This electric field completes the circuit from anode to cathode and the capacitor holds the charge indefinitely until it is removed from the circuit. In comparison to other capacitors, aluminum electrolytic capacitors have certain advantages including higher capacitance, lower cost and fast charge/discharge cycles. The ELXV630EC3470MH12D Aluminum Electrolytic Capacitor is specially designed to provide a greater capacitance than other capacitors, up to four times larger than capacitor with the same size. This is mainly because this particular capacitor uses an electrolyte with a higher conductivity, which leads to higher capacitance.

Conclusion

All in all, the ELXV630EC3470MH12D Aluminum Electrolytic Capacitor is a robust and reliable capacitor that can be used in a range of applications such as switching power supplies and power supply boards. It offers higher capacitance and good stability in high temperature and vibration conditions, as well as fast charge/discharge cycles compared to other similar capacitors. Its cost is also relatively low and it can increase the life expectancy of a circuit, making it a great choice for various industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description