| Allicdata Part #: | P36KBATB-ND |
| Manufacturer Part#: |
ERD-S2TJ363V |
| Price: | $ 0.00 |
| Product Category: | Resistors |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | RES 36K OHM 1/4W 5% AXIAL |
| More Detail: | 36 kOhms ±5% 0.25W, 1/4W Through Hole Resistor Axi... |
| DataSheet: |  ERD-S2TJ363V Datasheet/PDF |
| Quantity: | 15000 |
| 5000 +: | $ 0.00214 |
| 10000 +: | $ 0.00186 |
| Series: | ERDS2 |
| Packaging: | Tape & Box (TB) |
| Part Status: | Obsolete |
| Resistance: | 36 kOhms |
| Tolerance: | ±5% |
| Power (Watts): | 0.25W, 1/4W |
| Composition: | Carbon Film |
| Features: | -- |
| Temperature Coefficient: | -150/ -350ppm/°C |
| Operating Temperature: | -55°C ~ 155°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.067" Dia x 0.126" L (1.70mm x 3.20mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are used in many applications, from consumer electronics to industrial control systems. The ERD-S2TJ363V is a type of through hole resistor that is often used in these applications. This article will discuss the application fields of the ERD-S2TJ363V and its working principle.
ERD-S2TJ363V Application Fields
The ERD-S2TJ363V is a general-purpose, non-inductive resistor that is designed to handle up to 2A loads. It is commonly used in circuits where a stable, reliable resistive element is needed. This through hole resistor is ideal for use in consumer electronics, telecommunications, automotive, and industrial control systems.
In general, the ERD-S2TJ363V is used for applications that require a steady voltage and current supply. It is beneficial for use in low-noise or precision systems where variations in voltage/current or frequency response must be minimized. The resistor can also be used for current-limiting and for protection against circuit overload.
The ERD-S2TJ363V is also suitable for use in safety circuits, such as in hospital or commercial lighting. Its stable and reliable performance make it an ideal choice for these applications.
ERD-S2TJ363V Working Principle
The ERD-S2TJ363V works by providing a fixed resistive element in a circuit. This resistor is designed to handle up to 2A of current, which makes it a suitable choice for many different applications.
When a voltage is applied across the resistor, it will resist the flow of current, creating a voltage drop. The voltage drop across the resistor is directly proportional to the amount of current flowing through it. This means that the resistor will cause a decrease in voltage in a circuit, while also limiting the amount of current that can flow through it.
The resistor is designed to remain stable and reliable over time. This means that, even after extended periods of use, the resistor will not drift away from its initial resistance. This is essential for maintaining accuracy and consistency in the circuit\'s performance.
Conclusion
The ERD-S2TJ363V is a through hole resistor that is commonly used in consumer electronics, telecommunications, automotive, and industrial control systems. It is beneficial for use in low-noise or precision systems, as well as for current-limiting and protection against circuit overload. The resistor is designed to remain stable and reliable over time, allowing for accurate and consistent circuit performance.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...