ERF8-020-03-L-D-RA-L-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ERF8-020-03-L-D-RA-L-TR is a type of rectangular connector with arrays and edge type, which falls under mezzanine board-to-board connection. This type of connector is most convenient for applications that require high speed and low noise connections. The performance of such a connector is superior and it is recommended for a wide range of applications where performance is highly valuable.

The primary purpose of ERF8-020-03-L-D-RA-L-TR is to provide reliable signal transmission between two boards with a minimal amount of noise and achieving the highest speed possible. Its most common use is in high speed ones such as digital imaging, medical, instrumentation and data processing. This type of connector also has other advantages such as its ability to accommodate larger conductor sizes and greater current carrying capacity.

The structure of ERF8-020-03-L-D-RA-L-TR consists of two components: the header and the connector. The header includes the main contacts, the ground contacts and the center guide. Each of the main and ground contacts are soldered onto the header, while the center guide is responsible for aligning the two boards with each other. The connector has two main sections: the pins and the sockets.

The pins and the sockets are designed according to the form factor, ensuring the connectors are properly connected to the boards. The pins act as the transmitting port while the sockets act as the receiving end. Additionally, the pins and the sockets are designed to keep the board to board connection secure, eliminating the possibility of any breakage or misalignment. To guarantee the performance of the ERF8-020-03-L-D-RA-L-TR, each pin is designed to ensure the connection is strong and reliable.

The way in which the ERF8-020-03-L-D-RA-L-TR connectors are assembled is not complicated. First, the header and the center guide are secured in place with screws. Once the header is in place, the pins and the sockets are assembled on either side. The pins and the sockets are then secured with soldered joints. The resulting assembly is capable of providing a robust and reliable connection.

The ERF8-020-03-L-D-RA-L-TR connectors are capable of providing reliable performance for a variety of applications with minimal noise. These connectors are used in applications such as medical and instrumentation, digital imaging, data processing, and more. With its reliable performance and low noise nature, the ERF8-020-03-L-D-RA-L-TR connectors are highly recommended for use in any application that requires a reliable connection.

The specific data is subject to PDF, and the above content is for reference