| Allicdata Part #: | P75W-1TR-ND |
| Manufacturer Part#: |
ERG-1SJ750A |
| Price: | $ 0.02 |
| Product Category: | Resistors |
| Manufacturer: | Panasonic Electronic Components |
| Short Description: | RES 75 OHM 1W 5% AXIAL |
| More Detail: | 75 Ohms ±5% 1W Through Hole Resistor Axial Flame P... |
| DataSheet: |  ERG-1SJ750A Datasheet/PDF |
| Quantity: | 5000 |
| 5000 +: | $ 0.01532 |
| 10000 +: | $ 0.01430 |
| 25000 +: | $ 0.01359 |
| 50000 +: | $ 0.01331 |
| 125000 +: | $ 0.01302 |
| Series: | ERG |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Resistance: | 75 Ohms |
| Tolerance: | ±5% |
| Power (Watts): | 1W |
| Composition: | Metal Oxide Film |
| Features: | Flame Proof, Safety |
| Temperature Coefficient: | ±350ppm/°C |
| Operating Temperature: | -55°C ~ 235°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.110" Dia x 0.354" L (2.80mm x 9.00mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are a very common component in electronic circuits, and the ERG-1SJ750A is one type of resistor that falls into this category. It is a one-watt resistor that is made with a remarkable oxide film and has a wide variety of applications. In this article, we will explore the application field and working principle of this device in detail.
Introduction to the ERG-1SJ750A through hole resistor
The ERG-1SJ750A through hole resistor is an electronic component that is used in many types of circuit designs. It is designed to provide a resistance between 1 and 0.1 ohms, and has a maximum power rating of 1 watt. This component is manufactured with a special oxide film that is highly reliable and enables it to handle high voltage and power ratings with great efficiency.
The ERG-1SJ750A features a solid construction and can be easily soldered onto a printed circuit board (PCB) using standard soldering techniques. The resistor has a very low temperature coefficient, which means that it is good at maintaining its resistance to temperature fluctuations.
Application field for the ERG-1SJ750A through hole resistor
The ERG-1SJ750A through hole resistor is used in a variety of applications and projects. It is often used in power supply designs, automotive circuits, audio amplifiers, and HVAC systems. This resistor is also commonly used in circuits where current is switched, as it can handle high voltage and power ratings without any issues. It is also popular for voltage regulator or voltage reference circuits, thanks to its low temperature coefficient.
The ERG-1SJ750A can be used in any application that requires a resistor with a value between 1 and 0.1 ohms. That range is very common in many electronic circuits, and the device can be used without any issues in those types of applications.
Working principle of the ERG-1SJ750A through hole resistor
The ERG-1SJ750A through hole resistor works by creating a resistance to the flow of electrons through it. This enables it to reduce or limit the amount of current that can flow through a circuit. When the resistor is connected to a voltage source, electrons will be pushed through the resistor, and the amount of current that flows is determined by the resistance of the device. The greater the resistance, the lower the amount of current that can flow. The ERG-1SJ750A is designed to provide a resistance between 1 and 0.1 ohms.
The amount of heat generated by the resistor depends on the amount of current that is allowed to flow through it. This is known as power dissipation, and if the current is too high, the resistor can become hot and potentially fail. The ERG-1SJ750A is rated for a maximum power of 1 watt, which means that it can safely handle a maximum current of 1A. If the current exceeds this level, the resistor can become damaged, and it should not be used for higher currents.
Conclusion
The ERG-1SJ750A is a versatile and reliable through hole resistor with a wide range of applications. It is designed to provide a resistance between 1 and 0.1 ohms and can handle a maximum power of 1 watt. This makes it suitable for a variety of projects and circuit designs, including power supplies, audio amplifiers, and voltage reference circuits. The ERG-1SJ750A works by creating a resistance to the flow of current, and it is important to make sure that the current does not exceed the rated power of the device.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...