EZR-LCDK2W-434

Series:	EZRadio®
Part Status:	Obsolete
Type:	Transceiver
Frequency:	434MHz
For Use With/Related Products:	Si4455
Supplied Contents:	Board(s), Cable(s), Accessories

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EZR-LCDK2W-434 RF Evaluation and Development Kits, Boards

The EZR-LCDK2W-434 (Easy Radio Local Control & Data Kit 2 Wireless) is a unique RF Evaluation and Development Kit, designed for the teaching and testing of wireless communication protocols and technologies. The kit is intended for use in several application fields, including radio frequency (RF) propagation, signal-to-noise ratio (SNR) testing, wireless network architecture, mobile robotics, sensor network deployment and environmental monitoring. This kit uses two radio boards to evaluate a range of protocols, including ZigBee, Bluetooth, 6LoWPAN and other IEEE 802.15.4-enabled protocols.

Overview

The EZR-LCDK2W-434 is an intelligent development kit, which helps to simplify the development of embedded applications connected over radio interfaces. This kit comes with two wireless evaluation boards, including the S2C-4Z (4-Channel ZigBee™ module) and the S2C-BLU4 (4-Channel Bluetooth v4.0 module). It is designed to enable the evaluation of the radio properties, signal-to-noise ratio (SNR) testing, wireless network architecture design and implementation. The S2C-BLU4 board has a built-in Bluetooth v4.0 plus Dual Mode (Bluetooth Smart plus Classic) transceiver and S2C-4Z board contains a built-in IEEE 802.15.4 + 2.4GHz ZigBee™ transceiver.The EZR-LCDK2W-434 supports the evaluation of networks with multiple nodes with up to 2,000 feet (612 m) transmission range. It is designed for application development in the consumer, commercial, industrial, and healthcare markets. The EZR-LCDK2W-434 is easy to use and configure, with an intuitive software application (EZR Kit Manager) and hardware diagnostics. It also includes Development Support boards for device programming and debugging.

Working Principle

The working principle of the EZR-LCDK2W-434 is based on the use of two radio boards. Each board contains a built-in wireless transceiver. The S2C-BLU4 board has a built-in Bluetooth v4.0 plus Dual Mode (Bluetooth Smart plus Classic) transceiver and S2C-4Z board has a built-in IEEE 802.15.4 + 2.4GHz ZigBee™ transceiver.The boards are designed to communicate with each other using a special radio protocol. The protocol provides a reliable, low-power, and low-latency communication link. It also ensures compatibility between the two boards.The boards are also used for evaluation and development of wireless networks. The boards allow users to evaluate the radio properties, signal-to-noise ratio (SNR) testing, network architecture design and implementation.The kit is also used for testing and debugging of embedded applications connected over radio interfaces.The kit includes a special development support board for device programming and debugging. This board includes a USB interface and a 32-bit ARM Cortex-M0 microcontroller. The board also includes additional features such as on-board LEDs, a real-time clock and a temperature sensor.

Applications

The EZR-LCDK2W-434 can be used in a variety of application fields, such as radio frequency (RF) propagation, signal-to-noise ratio (SNR) testing, wireless network architecture, mobile robotics, sensor network deployment and environmental monitoring.The kit is well-suited for use in industrial, commercial, and consumer applications, particularly those involving low-latency, reliable communication. It is designed for both short-range and long-range applications, with a transmission range of up to 2,000 feet (612 m).The kit is also suitable for testing and debugging of embedded applications connected over radio interfaces. It provides an easy-to-use platform for the evaluation of a range of protocols, including ZigBee, Bluetooth, 6LoWPAN and other IEEE 802.15.4-enabled protocols.

Conclusion

The EZR-LCDK2W-434 is a unique RF Evaluation and Development Kit, designed for the teaching and testing of wireless communication protocols and technologies. The kit includes two evaluation boards, the S2C-4Z (4-Channel ZigBee™ module) and the S2C-BLU4 (4-Channel Bluetooth v4.0 module). It is designed for a variety of applications, from radio frequency (RF) propagation, signal-to-noise ratio (SNR) testing, wireless network architecture to sensor network deployment and environmental monitoring. The kit provides an easy-to-use platform for the evaluation and development of embedded applications connected over radio interfaces.

The specific data is subject to PDF, and the above content is for reference