FOD8143S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The FOD8143S is an optoisolator, transistor-photovoltaic output. It is an optoelectronic device that is used in telecommunications conditions to transfer a signal from one environment to another. This device enables connection between analog and digital circuits and provides an isolated barrier between the two enabling higher noise immunity. The FOD8143S is a 4-pin transistor-photovoltaic (TPV) output optoisolator for digital logic. It has a gallium arsenide infrared emitting diode (IRED) optically coupled to a monolithic silicon photovoltaic detector. It is effectuated by providing electrical isolation between input and output circuits through the use of photonics, which relies on light beams instead of the usual electrical connections as other signal transmitting methods.

The FOD8143S has an input LED current range from 4~20 mA, a CTR range (curvature in the transfer characteristic) from 500% (min) to 10,000% (max), and an isolation voltage rating of 5000Vrms. It is rated for an operating temperature range from -55°C to +125°C. Its high differential gain is achieved through a tight current/input condition, which allows it to operate in any of the available negative/positive logic configurations. This optoisolator is able to provide direct DC current/voltage operation.

The principle of operation of a FOD8143S optoisolator is based on photo-current effect. When the LED emits light within the phototransistor’s sensing area, an electrical current is generated in response. This current passes through the photoresistor attached to the LED, creating a voltage across the LED. The voltage across the LED is proportional to the magnitude of the light, and this in turn controls the current output of the phototransistor. When the current applied to the LED is decreased, the voltage across it decreases, which in turn reduces the current generated by the phototransistor.

The FOD8143S is used in a wide variety of applications including telecommunications, process control, industrial automation, factory automation, motor control, medical imaging, consumer electronics, etc. It is also commonly used for optical coupling in order to provide signal or power isolation between two circuits. It can be used to drive small loads up to 3A and high voltage up to 500V. In addition, the FOD8143S is ideal for interfacing digital logic – such as microcontrollers – to analog signals, or when input protection is required.

In conclusion, the FOD8143S is an optoisolator, transistor-photovoltaic output, which is highly reliable, cost-effective, and offers high levels of noise immunity. Its high CTR range enables the device to provide direct DC current/ voltage operation, while its wide range of applications makes it very useful in all kinds of applications. Moreover, its light-controlled principle of operation ensures that it will be able to accurately and reliably sense and isolate signals even under turbulent conditions. With its wide range of features and its low cost, the FOD8143S is indeed a great choice for anyone looking for an optoisolator with high performance and an excellent design.

The specific data is subject to PDF, and the above content is for reference