FODM3053R1_NF098

Current - On State (It (RMS)) (Max):	70mA
Approvals:	cUR, UR
Supplier Device Package:	4-Mini-Flat
Package / Case:	4-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 100°C
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.2V
Turn On Time:	--
Current - Hold (Ih):	300µA (Typ)
Series:	--
Current - LED Trigger (Ift) (Max):	5mA
Static dV/dt (Min):	1kV/µs
Voltage - Off State:	600V
Voltage - Isolation:	3750Vrms
Number of Channels:	1
Zero Crossing Circuit:	No
Output Type:	Triac
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers, optical couplers, photocouplers, and optoswitches, are devices that convert an electrical input into an optical output. The FODM3053R1_NF098 optoisolator is a component that consists of a Triac, SCR output, and LED as its components. It is used to safely transfer a control signal without being affected by electrical noise or interference. The working principle and application fields of the FODM3053R1_NF098 are outlined below.The FODM3053R1_NF099 is an opto-isolator with a transfer rate of 100 Kilobits per second. The LED component emits visible light when current flows through it. The light is then transferred to a Photosensitive device, such as a phototransistor, SCR, or triac, which is then used to activate the relevant switch or gate in the circuit. The LED component is driven by an output current of up to 30 mA, and the device can also be used in reverse by applying a voltage to the LED rather than current. The LED is powered by a floating input voltage of either 5, 10, 12, or 24 volts DC and provides a logic level output signal of approximately 8 volts. The output current is limited by the device’s on resistance to prevent damage to components. The FODM3053R1_NF098 optoisolator is used in a wide variety of applications. Some of the most common uses include providing electrical isolation between different circuits, protecting signals from electrical interference or noise, and providing a reliable AC or DC output signal. The device is also used for controlling domestic appliances, medical equipment, access control systems, and security systems. It can also be used in the automotive industry, where it is used to control outputs such as headlights and wipers. The FODM3053R1_NF098 optoisolator is a versatile component that can be used to provide reliable isolation and protection for a range of signals. It is easy to configure and is suitable for use in a range of applications, including automotive, medical, access control, and security. It is a cost-effective component that is well suited to a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description