| Allicdata Part #: | G6A-274P-ST27-USDC48-ND |
| Manufacturer Part#: |
G6A-274P-ST27-USDC48 |
| Price: | $ 3.38 |
| Product Category: | Relays |
| Manufacturer: | Omron Electronics Inc-EMC Div |
| Short Description: | RELAY GEN PURPOSE DPDT 2A 48V |
| More Detail: | General Purpose Relay DPDT (2 Form C) Through Hole |
| DataSheet: |  G6A-274P-ST27-USDC48 Datasheet/PDF |
| Quantity: | 1000 |
| 25 +: | $ 3.07364 |
| Turn On Voltage (Max): | -- |
| Coil Power: | -- |
| Contact Material: | Silver (Ag), Gold (Au) |
| Operating Temperature: | -40°C ~ 70°C |
| Termination Style: | PC Pin |
| Mounting Type: | Through Hole |
| Features: | -- |
| Release Time: | 3ms |
| Operate Time: | 5ms |
| Turn Off Voltage (Min): | 4.8 VDC |
| Series: | G6A |
| Switching Voltage: | 250VAC, 220VDC - Max |
| Contact Rating (Current): | 2A |
| Contact Form: | DPDT (2 Form C) |
| Coil Voltage: | 48VDC |
| Coil Type: | Non Latching |
| Relay Type: | General Purpose |
| Part Status: | Active |
| Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The G6A-274P-ST27-USDC48 signal relay is a type of device used for electrical switching and signal control applications. It is classified as a signal relay with up to 2 amps of current, making it suitable for applications where this amount of current is needed. In this article, we will discuss the application field and working principle of the G6A-274P-ST27-USDC48 signal relay.
Applications of G6A-274P-ST27-USDC48
The G6A-274P-ST27-USDC48 is typically used for applications in which space is limited and the signal must be controlled over long distances. These applications can include motor or servo motor control, robotics, and automation systems, among other applications. In addition, the G6A-274P-ST27-USDC48 is used in applications where fast response and high reliability are needed, such as when switching power to a motor.
Working Principle of G6A-274P-ST27-USDC48
The G6A-274P-ST27-USDC48 relay consists of a coil and two sets of contacts. When voltage is applied to the coil, it creates a magnetic field that causes the contacts to close. When the current is released from the coil, the contacts open. This basic principle is used in many relay applications, including those mentioned above.
In order for the G6A-274P-ST27-USDC48 relay to function correctly, the current and voltage must be controlled. This is done by controlling the amount of magnetic flux produced by the coil. When the current and voltage are balanced, the contacts will stay closed. But if the current or voltage becomes too high or too low, the contacts will open.
Conclusion
The G6A-274P-ST27-USDC48 signal relay is a type of device used for electrical switching and signal control applications. It is a signal relay with up to 2 amps of current, and is suitable for applications where this amount of current is needed. It is used in applications where fast response and high reliability are needed, such as motor or servo motor control, robotics, and automation systems. The working principle of the G6A-274P-ST27-USDC48 relay is controlled by balancing the current and voltage, so that the contacts will stay closed when the current and voltage are balanced.
The specific data is subject to PDF, and the above content is for reference
RELAY GENERAL PURPOSERelay
RELAY TELECOM DPDT 1A 24VTelecom Relay D...
RELAY GENERAL PURPOSE DPDT 1A 3VGeneral ...
RELAY GEN PURPOSE DPDT 1A 4.5VGeneral Pu...
RELAY TELECOM DPDT 2A 3VTelecom Relay DP...
RELAY GENERAL PURPOSE 4PDT 2A 3VGeneral ...