G6W-1F-R DC6

Turn On Voltage (Max):	4.8 VDC
Coil Resistance:	180 Ohms
Coil Power:	200 mW
Contact Material:	Copper (Cu), Gold (Au)
Operating Temperature:	-40°C ~ 70°C
Termination Style:	Gull Wing
Mounting Type:	Surface Mount
Features:	Sealed - Fully
Release Time:	10ms
Operate Time:	10ms
Turn Off Voltage (Min):	0.6 VDC
Series:	G6W
Switching Voltage:	30VAC, 30VDC - Max
Contact Rating (Current):	10mA
Contact Form:	SPDT (1 Form C)
Coil Voltage:	6VDC
Coil Current:	33.3mA
Coil Type:	Non Latching
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
High frequency (RF) relays are electronic components used to control the flow of electrical signals from one source to another using RF energy. The G6W-1F-R DC6 is a type of RF relay designed to operate in higher frequency applications. This article will discuss the application field and working principle of the G6W-1F-R DC6.Applications
The G6W-1F-R DC6 is primarily used in multi-source systems, such as wireless communication networks, LTE base stations, and distributed antenna systems (DAS). These applications require a high degree of protection against noise, interference, and other signal impairments. The relay supports a wide range of frequency bands, making it suitable for use in both single- and multi-mode systems. It is also used for switching circuits, switching amplifiers, phase tracking, synchronous switching, and more. In addition, it can be used in RF signal distribution systems.Working Principle
The G6W-1F-R DC6 is a high speed, non-contact type switch, meaning that it does not require electrical contact to operate. The relay works by utilizing the physical properties of materials, such as their dielectric or magnetic properties, to create a high speed, low impedance path for the RF signal to pass through. The relay is designed to operate at high frequencies, and it has a broad band frequency response of up to 3 GHz.The G6W-1F-R DC6 works by using an inner coil connected to a set of contacts which are used to complete the switching circuit. When a certain frequency is present, the coil reacts and causes the contacts to open or close depending on the voltage of the typically AC signal. This action creates a rapid break or make of the circuit, thus completing the switching operation.Conclusion
In conclusion, the G6W-1F-R DC6 is a high frequency (RF) relay designed to operate in higher frequency applications. It is primarily used in multi-source systems, such as wireless communication networks and distributed antenna systems. The relay works by utilizing the physical properties of materials, such as their dielectric and magnetic properties, to create a high speed, low impedance path for the RF signal to pass through. It has a broad band frequency response of up to 3 GHz.

The specific data is subject to PDF, and the above content is for reference