GP10THE3/54

Series:	SUPERECTIFIER®
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	1300V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.3V @ 1A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Reverse Recovery Time (trr):	3µs
Current - Reverse Leakage @ Vr:	5µA @ 1300V
Capacitance @ Vr, F:	5pF @ 4V, 1MHz
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	DO-204AL (DO-41)
Operating Temperature - Junction:	-65°C ~ 150°C
Base Part Number:	GP10T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to GP10THE3/54 Diodes - Rectifiers - Single

GP10THE3/54 diodes are a type of rectifiers that are single rectifiers as opposed to dual or multiple rectifiers. They are used in a wide variety of applications, from power supplies and voltage regulation to rectification and protection in vehicle and home electronics. By understanding the working principle and common applications of GP10THE3/54 diodes, one can better understand their uses and how they can be used in various situations.

Working Principle of GP10THE3/54 Diodes - Rectifiers - Single

GP10THE3/54 diodes operate on the principle of rectification. Rectification is the process of converting alternating current (AC) to direct current (DC). This process is done by allowing current to pass in one direction, but not in the opposite direction. The diodes are designed to permit the unidirectional flow of electrons, and function as a switch in order to cycle the electrons between high and low states as the voltage passes through its zero-crossing point. This change in voltage is then converted into a direct current, which can then be used to power devices.

Common Applications of GP10THE3/54 Diodes - Rectifiers - Single

GP10THE3/54 diodes are used in a variety of applications, ranging from power supplies and voltage regulation to rectification and protection in vehicle and home electronics. In power supplies and voltage regulation, the diode is used to convert AC power into DC power, allowing for the conversion of higher or lower levels of voltage. This allows for more efficient use of power and can be used to increase or reduce voltage levels depending on the application requirements. In rectification, GP10THE3/54 diodes are used to turn AC signals into DC signals. This can be used to filter or clean-up signals, as well as to control the speed of motors or provide power for other drives. In vehicle and home electronics, GP10THE3/54 diodes are used as protection devices to prevent over-current and short circuits. They are also used to filter out unwanted signals, reduce switch bounce and create efficient dimming of lights. Furthermore, they can also be used as power switches – providing “on/off” control of devices.

Conclusion

GP10THE3/54 diodes – Rectifiers - Single are widely used in a variety of applications. They are used to convert AC power to DC power, regulate voltage, rectify signals, and protect devices from over-current and short circuits. In addition, they are also used as power switches to provide “on/off” control of devices. By understanding the working principle and common applications of GP10THE3/54 diodes, one can better understand their uses and how they can be used in various situations.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description