H4BBT-10105-W1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires, or jumpers, are used as test probes, temporary bridging of circuit paths, and connecting microcontrolled peripheral devices. They come in a variety of shapes and styles and can be used to connect two points of an electrical circuit. They often rely on the ability to be clipped together to make the connection, but they may also be connected to a circuit board or wire harness via a soldered connection. Jumper wires are usually constructed with iron and copper conductors, and they are commonly insulated with insulation. The insulation can vary depending on the temperature conditions of the circuit environment.

H4BBT-10105-W1 is a widely used jumper wire for test and measurement applications. It is composed of four twisted-together strands of 24 AWG copper wire strands, and is protected by a white polyolefin overwrap. The wire also features a single-point crimp barb along the length of each wire. The barb accommodates a variety of pins and probes and makes it easy to connect to test points or components on a circuit board.

Pre-Crimped Leads

Pre-crimped leads are a type of lead wire used in the electronics industry. They are manufactured with a pre-applied crimp or clamp at the end of the lead to allow for easy termination and connection to a device or component. Pre-crimped leads are often used in situations where a reliable, repeatable and robust connection is needed. A variety of crimp hoops and tongues are available for attachment to lead, wires and even barbs.

H4BBT-10105-W1 is a pre-crimped lead cable available for use in a wide range of test and measurement equipment. The cable is constructed using four separate 24 AWG wire strands, twisted together and covered with a special white polyolefin overmold. The pre-crimped lead is designed to accept a wide range of pins and probes, and can easily be connected to test points or components on a circuit board. The pre-crimped lead is also flexible and can be used in applications where tight bends or movement is needed.

The specific data is subject to PDF, and the above content is for reference