HCNW4503#300

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers, photocouplers or optical isolators, are components which use light to transfer electrical signals between two isolated circuits. They are widely used to provide electrical insulation between a low-voltage controller and a high-voltage loads, reduce the noise, and protect circuits. One common type of optoisolator is the HCNW4503#300, a transistor-photovoltaic output isolator. This device uses an LED light source and a high-efficiency photovoltaic cell to transfer isolated electrical signals.

The HCNW4503#300 is a single-channel optoisolator, with an LED package for the input and a photodiode package for the output. The LED has a maximum forward current of 30 mA, reverse breakdown voltage of 5V, and a continuous reverse voltage of 5V. Its maximum display current is 0.5 mA. The Photodiode has a maximum forward current of 200 µA, maximum reverse current of 1 mA, reverse breakdown voltage of 15 V and a leakage current of 20 mA. The maximum collector-emitter voltage is also 15V.

The basic principle of operation for the HCNW4503#300 optoisolator is a photovoltaic effect. When a forward voltage is applied to the LED, photons from the LED are absorbed by the photodiode and converted into electrical current. The current flows through the photodiode and is transferred to the output side of the optoisolator, providing an isolated electrical signal which is proportional to the original input signal.

The HCNW4503#300 optoisolator has a wide range of applications due to its high-efficiency and low power consumption. It is commonly used in industrial automation systems and remote sensing systems. It is also widely used in data transfer tasks, due to its high level ofdata isolation. Additionally, because of its low leakage current and low power consumption, it is advantageous in applications which require low power or battery-powered systems. The HCNW4503#300 is also suitable for dry contact sensing applications, as the returned signal can be easily set and monitored reliably, regardless of conditions.

The HCNW4503#300 transistor-photovoltaic output optoisolator is a reliable, high-efficiency device suitable for a range of applications. Its low power consumption, data isolation, and reliability make it a popular choice for a variety of tasks. By transferring electrical signals with light, the HCNW4503#300 optoisolator provides an isolated electrical signal to allow for a variety of applications such as industrial automation, remote sensing, and dry contact sensing.

The specific data is subject to PDF, and the above content is for reference