Allicdata Part #: | 516-2763-ND |
Manufacturer Part#: |
HEDS-5540#H14 |
Price: | $ 0.00 |
Product Category: | Sensors, Transducers |
Manufacturer: | Broadcom Limited |
Short Description: | ENCODER KIT 3CH 400CPR 5MM |
More Detail: | N/A |
DataSheet: | HEDS-5540#H14 Datasheet/PDF |
Quantity: | 137 |
Series: | HEDS |
Part Status: | Active |
Encoder Type: | Optical |
Output Type: | Quadrature with Index (Incremental) |
Pulses per Revolution: | 400 |
Voltage - Supply: | 5V |
Actuator Type: | 5mm Open Center |
Detent: | No |
Built in Switch: | No |
Mounting Type: | Chassis Mount, Motors |
Orientation: | Vertical |
Termination Style: | Terminal Pins |
Rotational Life (Cycles Min): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Encoders are commonly used for motion control but can also be used to detect the rotational speed and direction of a moving part. HEDS-5540#H14 is an encoder that provides reliable, accurate, and precise information. This encoder is generally used for motor control, motion control, and higher-speed data transfer applications.
Application field of HEDS-5540#H14
HEDS-5540#H14 is a two-channel optical shaft encoder. It is an ideal choice for a wide variety of applications, including motor speed monitoring, position control, velocity control, and motion control. This encoder can be used in a variety of industries and applications, such as robotics, automotive, aviation, medical, industrial automation, measurement and control systems, etc. It can also be used in servos, motion controllers, potentiometers, linear actuators, and stepping motors.
The encoder features a brushless 18-pole slot output, and a resolution of up to 2,560 lines per revolution. It has a low-voltage operating range from 3.0 to 5.5 Volts. It also offers low-temperature drift and high immunity to electrical noise for challenging applications.
Working Principle of HEDS-5540#H14
HEDS-5540#H14 encoder is based on incremental optical principle. It contains two sets of slotted wheels which is illuminated by light emitting diode and photosensor. The rotational movement of the shaft will cause the slots to move to the photo-sensor which then produces electrical pulses located on the wheels.
The pulse count is used as a measure of position and the direction of the rotation can be determined by the sequence of pulses. This makes it suitable for use in motor control applications. The pulse rate output is twice the resolution of he slots so the encoder can provide up to 2,560 pulses per revolution.
The encoder is also equipped with a brushless output which provides a precise signal with no mechanical friction. This makes it ideal for applications where accuracy is important, such as in robotics and industrial automation. The encoder also offers high immunity from electrical noise and low temperature drift, making it suitable for even the most challenging applications.
Conclusion
HEDS-5540#H14 encoder is an ideal choice for motor speed monitoring, position control, velocity control, and motion control applications. It features an incremental optical principle, 2,560 lines per revolution resolution, a brushless 18-pole slot output and a low-voltage operating range from 3.0 V to 5.5 V. This encoder also offers low-temperature drift and the high immunity to electrical noise, making it suitable for even the most challenging applications.
The specific data is subject to PDF, and the above content is for reference
OPTICAL ENCODER
ENCODER HT 3CH 512CPR 11MM
ENCODER DGTL 2CH150LPI BENT LD
ENCODER KIT 3CH INCREMENT 400CPR
ENCODER MECH 15-PULSE 30-DETENT
ENCODER ROTARY 1000PPR 9V