HIN207EIB-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HIN207EIB-T is a general purpose, rail-to-rail input and output, single supply transceiver supplying 10 Mbps data rates on digital ports. HIN207EIB-T products are designed for wide range of applications that require high speed data communication.

These transceivers are widely used in many electronic systems. It can be used for Ethernet, serial buses and Local Area Networks. It is often used in mid-speed communication systems such as FireWire, USB, WiFi and Zigbee. This transceiver can also be used as an Ethernet switch for connecting two or more networked devices.

HIN207EIB-T is designed with a low-voltage differential signaling (LVDS) transceiver and supports a wide operating temperature range from 0°C to +85°C. The device supports full-duplex communication on a single pair of wires, at the same time providing data, control and power. It is available in a 24-pin, 4x4-mm LFCSP and 24-pin, 4x6-mm SSOP packages.

One of the main features of this transceiver is its ability to operate within the third-generation high-speed serial data standard, called High Speed Inter-Integrated Circuit (HSIC). This standard supports high speed communication between integrated circuits. HSIC offers data rates up to 100 Mbps and supports up to 8 independent data paths.

HIN207EIB-T also has programmable parameters to change the interface timing and compliance to data speed, voltage and clock frequencies. A control register is used to control the transceiver’s parameters, such as input/output delay, output inversion, data width and slew rate. This allows the user to adjust the timing and compliance of the device according to the type of data being transmitted and the data rate. Additionally, the device supports a programmable on-chip oscillator, which is used to generate a master clock signal to drive the transceiver.

The working principle of HIN207EIB-T transceiver is based on three components: transmitter, receiver and clock circuit. The transmitter is responsible for driving the signal onto the output pin and the receiver is responsible for receiving the signal from the input pin. The clock circuit is responsible for generating a master clock signal and providing synchronization between transmitter and receiver.

The transmitter takes the data from the user\'s data bus and encodes the data into a voltage value. The encoded data is then placed onto the output pin. The receiver then takes the data from the input pin and decodes it into a voltage value. The decoded data is then placed back onto the user\'s data bus.

The clock circuit generates a master clock signal which is used to drive both the transmitter and the receiver. The clock signal is also used to synchronize the transmitter and receiver, ensuring that they both work in perfect synchronization.

Overall, HIN207EIB-T is a single-supply, rail-to-rail input and output, LVDS transceiver which is suitable for a wide range of applications that require high speed data communication. It can be used for Ethernet, serial buses and Local Area Networks, and supports data rates up to 100 Mbps. It also has programmable parameters and utilizes a master clock signal to drive the transceiver. It is available in two different packages, 24-pin, 4x4-mm LFCSP and 24-pin, 4x6-mm SSOP.

The specific data is subject to PDF, and the above content is for reference