HMC663LC3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Mixers are devices used to convert signals between two different frequencies. The HMC663LC3 is an example of a wideband, high-dynamic range RF mixer, which allows for operation in several different application fields.

The operating frequency of the HMC663LC3 ranges from 4.2 GHz to 11.5 GHz, as well as a higher frequency range of 4.2 GHz to 12.75 GHz, with an absolute gain flatness of 1.8 dB along its 3.2 GHz bandwidth. This wide range of frequencies is ideal for radio routers, cellular base station, Point-to-Point Radio, and other high-frequency, high-power systems.

The HMC663LC3 offers a range of performance benefits, including a low noise figure of 10 dB, a low conversion loss of 5.5 dB, and high isolation between ports. Furthermore, it is highly linear, making it ideal for applications which require precise phase and amplitude accuracy. It also features an integrated balun, which makes it convenient for use with microstrip and other integrated planar designs.

The HMC663LC3 is a double-balanced mixer, which consists of a pair of FETs connected in parallel and a balun. These FETs have a common-source connection and are biased to provide a high transconductance, which is necessary for high frequency operation. The input signal is provided to one side of the balun, and separate bias networks are used to compensate the signal ports. The output signal is then taken from both sides of the balun.

In operation, the FETs operate in an open-loop configuration, allowing the signal to pass through the device. The circuit is designed so that the FETs exhibit a matched impedance transformation ratio between the signal input and output. This allows for a precise phase and amplitude reproduction of the incoming signal in the output. The circuit is also designed to maximize isolation between ports, which helps maintain signal performance even when the frequency of the input signal is varied.

The HMC663LC3 is particularly suitable for use in high-power applications. The device can withstand up to +33 dBm output power. This makes it ideal for use in base stations or radio routers. Furthermore, the device has been designed to minimize 3rd-order intermodulation distortion, which can be a major issue in high-power transmit systems.

In conclusion, the HMC663LC3 is a high-performance RF mixer which is particularly suitable for high-frequency, high-power systems. Its wide frequency range, low noise figure, and high linearity ensure it is an ideal solution for a range of applications. The fact that it also incorporates an integrated balun makes it an extremely convenient device for most types of RF system designs.

The specific data is subject to PDF, and the above content is for reference