Allicdata Part #: | ILD1-X009-ND |
Manufacturer Part#: |
ILD1-X009 |
Price: | $ 0.37 |
Product Category: | Isolators |
Manufacturer: | Vishay Semiconductor Opto Division |
Short Description: | OPTOISO 5.3KV 2CH TRANS 8SMD |
More Detail: | Optoisolator Transistor Output 5300Vrms 2 Channel ... |
DataSheet: | ILD1-X009 Datasheet/PDF |
Quantity: | 1000 |
2000 +: | $ 0.34270 |
Series: | -- |
Packaging: | Tube |
Part Status: | Active |
Number of Channels: | 2 |
Voltage - Isolation: | 5300Vrms |
Current Transfer Ratio (Min): | 20% @ 10mA |
Current Transfer Ratio (Max): | 300% @ 10mA |
Turn On / Turn Off Time (Typ): | 700ns, 1.4µs |
Rise / Fall Time (Typ): | 1.9µs, 1.4µs |
Input Type: | DC |
Output Type: | Transistor |
Voltage - Output (Max): | 50V |
Current - Output / Channel: | 50mA |
Voltage - Forward (Vf) (Typ): | 1.25V |
Current - DC Forward (If) (Max): | 60mA |
Vce Saturation (Max): | 400mV |
Operating Temperature: | -40°C ~ 100°C |
Mounting Type: | Surface Mount |
Package / Case: | 8-SMD, Gull Wing |
Supplier Device Package: | 8-SMD |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are essential components in electronics which provide a way to isolate one electrical circuit from another. As their name implies, op-toisolators use light to provide the communication between circuits without bridging the electrical isolation between them. The ILD1-X009 model is a transistor output optoisolator which uses a small light-emitting diode (LED) to control a transistor which in turn controls the current flow between two different circuits.
The ILD1-X009 optoisolator works in a similar fashion to a basic transistor circuit, but with the added advantage of the optical isolation between the signal and power circuits. The optoisolator transforms the relatively small electric signal from the LED into a larger signal that is sufficient to control the transistor. In turn, the transistor opens and closes the circuit, depending on the input provided by the LED.
The ILD1-X009 optoisolator is used in numerous applications where there is a need to separate two circuits electrically yet still allow them to communicate. One of the most common applications is to isolate the signal between two circuits of different voltage levels or between two circuits of different propagation speeds. In this application, the optoisolator provides the required electrical separation between the two circuits while permitting the communication of the signal.
The ILD1-X009 optoisolator is also often used in the design of power supply lines. In this application, the optoisolator provides a way to separate the load from the power source, while allowing them to control each other. The optoisolator is used to isolate the power circuits from each other, while still allowing the current to be controlled by the voltage in the signal lines. The signal line can be used to control the level of current flowing through the power line, allowing the power supply to be regulated in a precise manner without introducing noise or other interference into the system.
The ILD1-X009 optoisolator is able to operate at frequencies averaging up to 2GHz, which opens up a broad range of practical applications ranging from communications systems to automotive applications. In communications systems, it is used to control data transmission between transmitters and receivers. In automotive applications, it is used to help control the speed and direction of the car.
The ILD1-X009 optoisolator is a powerful tool when it comes to isolating communication between two circuits and regulating current flow in power supply lines. Its photovoltaic output makes it a good choice in a variety of applications. The simple design of the optoisolator makes it relatively easy to use, and its high-frequency operation is practical for many kinds of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ILD1211T | Vishay Semic... | 0.34 $ | 1000 | SOIC-8 CPL 110C DUAL CTR>... |
ILD1213T | Vishay Semic... | 0.34 $ | 1000 | SOIC-8 CPL 110C DUAL CTR>... |
ILD1205T | Vishay Semic... | 0.34 $ | 1000 | OPTOISO 4KV 2CH TRANS 8SO... |
ILD1206T | Vishay Semic... | 0.34 $ | 1000 | OPTOISO 4KV 2CH TRANS 8SO... |
ILD1217T | Vishay Semic... | 0.35 $ | 1000 | SOIC-8 CPL DUAL CTR>100% ... |
ILD1-X007 | Vishay Semic... | 0.37 $ | 1000 | OPTOISO 5.3KV 2CH TRANS 8... |
ILD1-X009 | Vishay Semic... | 0.37 $ | 1000 | OPTOISO 5.3KV 2CH TRANS 8... |
ILD1-X001 | Vishay Semic... | 0.37 $ | 1000 | OPTOISO 5.3KV 2CH TRANS 8... |
ILD1-X007T | Vishay Semic... | 0.41 $ | 1000 | OPTOISO 5.3KV 2CH TRANS 8... |
ILD1-X009T | Vishay Semic... | 0.41 $ | 1000 | OPTOISO 5.3KV 2CH TRANS 8... |
ILD1-X019T | Vishay Semic... | 0.43 $ | 1000 | OPTOISO 5.3KV 2CH TRANS 8... |
ILD1150XUMA1 | Infineon Tec... | 0.92 $ | 1000 | IC LED DRIVER CTRLR DIM 1... |
ILD1151XUMA1 | Infineon Tec... | 0.98 $ | 1000 | IC LED DRIVER CTRLR DIM 1... |
ILD1 | Vishay Semic... | -- | 2025 | OPTOISOLTR 5.3KV 2CH TRAN... |
ILD1615-4 | Vishay Semic... | 1.36 $ | 1995 | OPTOISO 5.3KV 2CH TRANS 8... |
ILD1207T | Vishay Semic... | -- | 2000 | OPTOISO 4KV 2CH TRANS 8SO... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...